Originally Posted by Hilla
(Post 9697758)
Spent a bit of time cleaning today, quick picture below of my efforts. Love the colour so much, catches the light perfectly :D
http://i400.photobucket.com/albums/p...3/8b021a7f.jpg |
looking good Hilla :)
|
Cheers both!
I used my Karcher with snow foam attachment, soaked the car and left it for 5 mins before rinsing. Then washed it with Autoglym shampoo, two bucket method and lambs wool mitt. Dried using a couple of microfibres. Used Autosol on the backbox and tip, and buffed with a cotton cloth. Finally, used a can of Supaguard tyre dressing applied using an old sponge to avoid spraying it on the rim. Thinking of claying/polishing and waxing next weekend to prepare it for winter. A couple of coats of wax should enable me to just wash it over the winter. :D |
scoob number 3 think i might keep this one now
bought this 2 weeks ago as a totally standard car have since had both sides and the boot sprayed to remove sticker shadows and all colour coded at the same time, full toyosports turbo back system and ported headers,TD05 20g,to replace the 16g 550 injectors fitted simtek ecu fitted and mapped and apexi intake and induction kit fitted, fitted the fog cover and scoop in the bumper jun front splitter and clear side repeaters and indicators and fitted scoop on bonnet to replace left vent, and finally got a nice set of wheels off fellow sn member that were gold and stripped and re powder coated them anthracite, thats it so far but look back in a few weeks and im sure there will be lots morle, booked in to see mark at thwaites developments on thursday to fit some det cans and have a listen then see how far we can go with the boost as it is now then make a decision on the next phase of tuning .
[IMG]http://i994.photobucket.com/albums/a...y/CIMG0476.jpg[/IMG] [IMG]http://i994.photobucket.com/albums/a...y/CIMG0482.jpg[/IMG] [IMG]http://i994.photobucket.com/albums/a...y/CIMG0478.jpg[/IMG] |
|
much better mate !
|
Nice, like that!!
|
Oooooh. Suits you sir, suits you! lol
|
Originally Posted by blackcountryboy
(Post 9703681)
|
lmao
Is any here any good with fitting a push-button start? Ive seen universal rickbrook ones for under £30 and I do like the push button start, dont mind paying someone a few quid to do it, long as it looks like it came with the car. :) |
From gold
http://i818.photobucket.com/albums/z...z/6dbd3e01.jpg To silver! http://i818.photobucket.com/albums/z...z/69437b71.jpg I think it looks better with clear indicators etc. Any thoughts? |
looks good, I think the gold suited better though......I reckon a dark bronze would finish that car off a treat :)
|
Originally Posted by Carlh
(Post 9704480)
lmao
Is any here any good with fitting a push-button start? Ive seen universal rickbrook ones for under £30 and I do like the push button start, dont mind paying someone a few quid to do it, long as it looks like it came with the car. :) |
I dont mind putting the key in :D
I might get the missus to buy me one for xmas. :) |
hey pyro, was you at the last meet a few weeks ago ? What motor were you in and are you coming to the tunnel run :D
|
Hey,
In order: No, but I was at the Breakfast Club. This one: http://pyro-net.co.uk/images/imp/Imp68.jpg and no. :] |
Thats nice pyro. Loving the wheels. Is it me or are the back one's different to the front one's?
|
Originally Posted by Carlh
(Post 9706183)
Thats nice pyro. Loving the wheels. Is it me or are the back one's different to the front one's?
Fronts are 8.5j, ET 13, 2.5" dish Rears are 9.5j, ET 3, 3.5" dish :thumb: |
Originally Posted by bigfarlz
(Post 9704501)
From gold
http://i818.photobucket.com/albums/z...z/6dbd3e01.jpg To silver! http://i818.photobucket.com/albums/z...z/69437b71.jpg I think it looks better with clear indicators etc. Any thoughts? |
|
Hi Guys
I have now got my front end all done with the crystal upgrade and i think it looks so much better. from this http://i256.photobucket.com/albums/h...y/P1000319.jpg to this http://i256.photobucket.com/albums/h...P1000145-1.jpg also got my carbon scoop on now,i know alot of you will hate it but i'm really happy with it http://i256.photobucket.com/albums/h...y/P1000147.jpg http://i256.photobucket.com/albums/h...y/P1000146.jpg |
:thumb: love it
|
scoob number 4
scoob number 4 and finally found a good original version 1:luxhello:
http://img707.imageshack.us/img707/8...vi8e0gneo2.jpghttp://img404.imageshack.us/img4 http://img801.imageshack.us/img801/5...qvmeez2e7b.jpg http://img404.imageshack.us/img404/2...qjlyezy84o.jpg |
^^^^^ Excellent condition for a Version 1......
|
Originally Posted by Dirk Diggler 75
(Post 9790556)
^^^^^ Excellent condition for a Version 1......
|
very nice Krazy, I love ver1's :)
|
Very nice Krazy, its nice to see an unabused, unchaved version 1 like it a lot.
|
scoob number 5 arrived STI V2 V-LIMITED
http://img832.imageshack.us/img832/5...iokkqe0ugd.jpg
http://img267.imageshack.us/img267/7...hqyokneez2.jpg http://img228.imageshack.us/img228/5...hqeokoyezt.jpg http://img821.imageshack.us/img821/8...hquoknqez3.jpg http://img834.imageshack.us/img834/9...qoknuez1dg.jpg VERSION 2 1994 No: 78/100 OF THE FIRST HUNDRED EVER HAND BUILT IT HAS BEEN SLIGHTLY MODIFIDY BY..... ENGINE A "HKS" DECATT DOWN PIPE "HKS" 3" SUPER DRAGER FULL EXHAUST SYSTEM A "KS ROM" CHIPPED ECU (FROM JAPAN) "WALBRO" FUEL PUMP "FORGE" DUMPVALVE "GREEDY" BOOST GAUGE "EXCEDY" CLUTCH , PRESSURE PLATE "API" LIGHTENED FLY WHEEL 5 SPEED LOW RATIO STRAIGHT CUT BOX PLATED LSD DIFF HANDLING AND BRAKES CARBON FIBRE STRUTT BRACE EIBACH SPRINGS 4 POT BRAKE CALIPER AND DISC CONVERTION BRAIDED BRAKE LINES AP RACING 5:5:1 BRAKE FLUID P1 FRONT SPLITTER ORIGINAL BOOMERANG REAR WING STI 5 SPOKE ALLOYS FINISHED IN SATIN BLACK AND TO COMPLETE THE INTERIOR SPECIAL EDITION COLIN McRAE SIGNED SEATS |
^^^^^ Got anymore knocking about?
Could do with a spare one..........lol... |
Originally Posted by Dirk Diggler 75
(Post 9800794)
^^^^^ Got anymore knocking about?
Could do with a spare one..........lol... |
All times are GMT +1. The time now is 01:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands