Thanks Don,

If you didn't know already, I :luvlove: you.

I ordered a set of these from Alan at AS PERFORMANCE. Cheap as chip £45 delivered

Looks great 👍 What other mods do you have to reach that?

Thanks Don, I'll have to get under her tonight. I caught the front on a rasied kerb and it pulled the splitter off and damaged the undertray in front of the passenger side front wheel. It looked light it was connected the central tray.

MY11 Hatch Rear ARB Size
 

Hi
It looks like I need to replace my rear ARB bushes, I was thinking of getting some Powerflex ones.
Does anyone (Don?) know the diameter, I believe they MY11 had uprated front & rear ARBs.
I thought I'd seen a previous thread about it on here, but can't find it now, where they were shown as 19mm, but Powerflex only list 16, 18 & 20mm versions...
Any help appreciated.

MY11 onwards WRX STI OEM sizes Front 21mm; Rear 19mm
MY08-10 WRX STI Front 20mm; rear 18mm

Thanks Don much appreciated

Powerflex Rear 19mm ARB Bushes
 

Just a heads up regards 19mm rear ARB bushes for the MY11 onwards.
Having been unsuccessful in finding any PU replacements for the OE fit bushes, I contacted Powerflex and they are now adding a 19mm bush to their range, should be available within a month.

Bit random, does anyone have a factory fit head unit that has bluetooth, Nav and rear camera fitted.?if so could you post up the model number and make of the unit

In the UK for MY11 onwards Subaru offered the Pioneer AVIC navigation models rather than an OEM unit.

However the OEM Navi units listed in the parts database are upto MY10 86271SC030, MY11 onwards 86271SC121 (accessory version RHD H001EFG011)
All are Kenwood units one being model FXDD07EF2 I believe.

http://eshop.ricambisubaru.it/images/product/NAVI21.jpg

Model code for later version
https://www.proxyparts.com/upload/pa...55/large/2.jpg

Don you're still an absolute legend for info, how are things?

I had a unit fitted to my 60 plate saloon and the head unit had a reverse camera, do you happen to know if the above have the same?

​​​
Cheers

​​​​

Yes there is a worldwide accessory camera
http://clarkdh.net23.net/NTL/MY10%20rear%20camera.JPG

More info here
https://www.iwsti.com/forums/gr-ice-...amera-faq.html

Cheers Don, assume that camera works on the 7EF2 unit. Think I've found one at a half descent price but wanted to fit a camera system to it so trying to tick the boxes before I buy

It's listed against the earlier hatch models so assume yes.

Is this going in the FSTi?
If so not sure how the wiring will stack up as the instrument panel loom is usually different if Navi is fitted instead of Radio.
The "accessory" version comes with a wiring harness adaptor.
You can download the fitting instructions from here
https://www.manualslib.com/download/...001efg001.html

Yes mate, it's going into a forester sti, facelift. Just waiting for the call to go and collect it. It looks to have an aftermarket system installed so looking at potential replacement. I've always liked keeping things oem so was hoping to fit a new age unit that has the option to fit a reverse camera, from what I can tell for the camera to work it has to be a satnav system. Wish I had a better interior shot of my 60 plate saloon as the head unit fitted in there was an upgrade and had all the options I'm after, satnav, camera, sd card and I'm pretty sure the Bluetooth connection allowed for music streaming from my phone.

Hi Don, Do you have the part numbers for a 2011 facelift front bumper and front tow hook cover in Platinum White Pearl?

Cheers!

Paintcode is 37J - Satin White Pearl - part number suffix WU (where applicable)
Complete list of parts in this post from rob84 (Rob Ostle)
https://www.scoobynet.com/763923-08-...l#post11963331
HOWEVER the bumper cover and tow eye cover do not come pre-painted.
Part numbers are still good

http://clarkdh.net23.net/NTL/MY12%20front%20bumper.JPG

Thanks Mate, do you also have the part number for the left and right attachment clips to clip the bumper to the wings?

Cheers

Have listed the relevant clips

http://clarkdh.net23.net/NTL/MY12%20bumper1.jpg

http://clarkdh.net23.net/NTL/MY12%20bumper2.jpg

There are also two brackets that fit to the base of the headlights
Bracket - Front Bumper corner Right 57707FG062
Bracket - Front Bumper corner Left 57707FG072

http://jp-carparts.com/images/subaru...mage_840_5.gif

Cheers Don!

You have pm....:thumb:

I'm thinking of getting some 19in wheels for my saloon, what are my options?

Anybody got any pics? :)

Not the best pictures @legacywr ,but gives you an idea what the Prodrive GT2's look like …..:thumb:


https://cimg6.ibsrv.net/gimg/www.sco...22a2326698.jpg
https://cimg8.ibsrv.net/gimg/www.sco...4b912d8771.jpg
https://cimg2.ibsrv.net/gimg/www.sco...6c7d0f82db.jpg

19mm Rear ARB Bushes
 

Hi
If any of you are still running original ARBs and like me have been struggling to find the right shape and size poly bush to replace the OE rubber, then Powerflex now make a 19mm rear bush for the rear of the MY11 cars (saloon or hatch).

It's not easy to find on their website so here's the link they provided me when they'd added it to their range last week.

https://www.powerflex.co.uk/product-...9mm/12968.html

Hi lads looking to move these Covers 400 for all 3

Good evening all, can anyone (Don) please tell me the part numbers for the Brake fluid & power steering yellow caps and best place to buy them from, or does anyone on here have the originals for sale ??

Cheers

Hugh

26452AG000

https://cimg9.ibsrv.net/gimg/www.sco...29ab47a420.jpg

34631AG001
https://cimg8.ibsrv.net/gimg/www.sco...61be25f7a5.jpg