|
08/07/2021 Rear lamp change.
BEFORE: https://live.staticflickr.com/65535/...9aee6a9d_c.jpg AFTER: https://live.staticflickr.com/65535/...fa44e396_c.jpg |
Originally Posted by RESSE
(Post 12107601)
08/07/2021 Rear lamp change.
BEFORE: https://live.staticflickr.com/65535/...9aee6a9d_c.jpg AFTER: https://live.staticflickr.com/65535/...fa44e396_c.jpg |
One of t easy and best looking mods to do on a Hawkeye, rear end looks so much better with Blobeye lights fitted:thumb:
|
|
|
Pretty much finished the interior on my RA.
https://live.staticflickr.com/65535/...67d05625_c.jpg https://live.staticflickr.com/65535/...25d5e992_c.jpg https://live.staticflickr.com/65535/...d6fa32fe_c.jpg Finally got the two them together (9GT) https://live.staticflickr.com/65535/...cc76ac29_c.jpg |
Replaced the MAP sensor with a LINK unit:
https://cimg9.ibsrv.net/gimg/www.sco...4b49e8c324.jpg After searching what felt like the entire internet for diagrams\pinouts\wiring information unsuccessfully, I decided to collaborate with a local tuner who does wiring and we created a short YouTube video to make other people's lives easier. I know every model might have a different pinout or wire colors so this method should work for all applications. Here is the link if anyone else ever needs the wiring info: Hope this helps, ET |
Prodrive diff guard finally fitted.
https://cimg4.ibsrv.net/gimg/www.sco...5df76c10a3.jpg https://cimg7.ibsrv.net/gimg/www.sco...fbd65d904c.jpg I prefer pink then the blue. |
Not a mod as such but had a healight restorer kit knocking around so decided to give it a go.
https://live.staticflickr.com/65535/...5c2f072b_c.jpg The N/S headlight was done first. Quite a difference between the two! |
When I first had mine done they looked the bees knees. Now a year later they have hairline cracks that really bug me. And yes uv protection was used on them.
|
A few hours today and slowly getting the parts off the shelf and on the car.
Beat rush pitch fork installed and a new pcv valve done. https://cimg4.ibsrv.net/gimg/www.sco...876d3263b8.jpg https://cimg7.ibsrv.net/gimg/www.sco...b375f8a4ee.jpg https://cimg9.ibsrv.net/gimg/www.sco...b4841df5bc.jpg https://cimg0.ibsrv.net/gimg/www.sco...6b342bdfbf.jpg Inlet hose and slave cylinder next |
So a few changes for me recently after 9 years of owning my car and various different power stages from completely standard to 426bhp it was time to move to a 6 speed, decided to go a different route than normal I managed to pick up a spec b legacy that had a blown engine for £1000 and put the 6 speed and diff in mine so could stay at 5x100 we had to modify the speedo as it’s slightly different in the legacy’s to the Impreza I never done this so not sure what was involved but I’m sure someone on here will be able to tell me
I’d been having trouble on boost every time I come on to boost smoke out the exhaust so was either over fuelling or letting oil through the turbo after taking it off we found the turbo to be letting oil through and was knackered, the decision was made not to rebuilt it as to be honest it never really suited the car and was very laggy so I opted for the RCM precision turbo seen some good power made on 2.0 engines so hopefully it works well https://cimg7.ibsrv.net/gimg/www.sco...69521a366.jpeg https://cimg8.ibsrv.net/gimg/www.sco...448fbf489.jpeg Next choice I decided was I wanted to reverse the manifold two reasons was less travel for the air to travel and I personally think it looks so much better https://cimg2.ibsrv.net/gimg/www.sco...fb3958a5d.jpeg Had a few other little jobs sorted Gauges all wired up 10mm spacers on the rear wheels 2 arch liners as mine were cracked Painted windscreen wipers as all the paint was coming off That’s about it getting mapped by Bob Rawle on Friday so fingers crossed everything is ok and there’s no issues |
Originally Posted by Mustoe91
(Post 12110511)
So a few changes for me recently after 9 years of owning my car and various different power stages from completely standard to 426bhp it was time to move to a 6 speed, decided to go a different route than normal I managed to pick up a spec b legacy that had a blown engine for £1000 and put the 6 speed and diff in mine so could stay at 5x100 we had to modify the speedo as it’s slightly different in the legacy’s to the Impreza I never done this so not sure what was involved but I’m sure someone on here will be able to tell me
I’d been having trouble on boost every time I come on to boost smoke out the exhaust so was either over fuelling or letting oil through the turbo after taking it off we found the turbo to be letting oil through and was knackered, the decision was made not to rebuilt it as to be honest it never really suited the car and was very laggy so I opted for the RCM precision turbo seen some good power made on 2.0 engines so hopefully it works well https://cimg7.ibsrv.net/gimg/www.sco...69521a366.jpeg https://cimg8.ibsrv.net/gimg/www.sco...448fbf489.jpeg Next choice I decided was I wanted to reverse the manifold two reasons was less travel for the air to travel and I personally think it looks so much better https://cimg2.ibsrv.net/gimg/www.sco...fb3958a5d.jpeg Had a few other little jobs sorted Gauges all wired up 10mm spacers on the rear wheels 2 arch liners as mine were cracked Painted windscreen wipers as all the paint was coming off That’s about it getting mapped by Bob Rawle on Friday so fingers crossed everything is ok and there’s no issues are you still bringing your car up to hinckley for paul to work on? |
Originally Posted by the shreksta
(Post 12110512)
looking good sam, your 5 speed held out for a long time did it not?
are you still bringing your car up to hinckley for paul to work on? |
Originally Posted by RobsyUK
(Post 12110507)
When I first had mine done they looked the bees knees. Now a year later they have hairline cracks that really bug me. And yes uv protection was used on them.
Edit: it seems it's possible for non-HIDs. |
|
That ic looks very nice what make is it 😍
|
Originally Posted by lockheed
(Post 12110552)
That ic looks very nice what make is it 😍
|
Think I may have gone a little small.
asked for 9×3 for the front And the green strip represents the country I like or triggers the tesla folk 😉 https://cimg3.ibsrv.net/gimg/www.sco...609d58b04a.jpg |
Finally got some blobeye rear lights. They look so much better!
https://cimg1.ibsrv.net/gimg/www.sco...470e845619.jpg https://cimg2.ibsrv.net/gimg/www.sco...dea62cff01.jpg https://cimg3.ibsrv.net/gimg/www.sco...3181bd6373.jpg https://cimg4.ibsrv.net/gimg/www.sco...7efd3e0370.jpg |
Best cheap/easy mod you can do in my book to get rid of them those Hawkeye back lights:thumb:
|
Winter wheels went on, also painted the inlet manifold, new turbo blanket, silicon rad hoses, killer b sump/pick up etc and ported the standard exhaust manifold
https://cimg7.ibsrv.net/gimg/www.sco...b85385849e.jpg https://cimg4.ibsrv.net/gimg/www.sco...cd00b4706c.jpg https://cimg7.ibsrv.net/gimg/www.sco...2f43ceb656.jpg |
Looking good there Jack, show us the pics of what you did underneath........
|
Originally Posted by lockheed
(Post 12114849)
Looking good there Jack, show us the pics of what you did underneath........
killer b pick up pipe and windage tray https://cimg3.ibsrv.net/gimg/www.sco...b24a8b4c11.jpg https://cimg3.ibsrv.net/gimg/www.sco...2ee2c908dc.jpg All hidden up https://cimg6.ibsrv.net/gimg/www.sco...09caf896f5.jpg |
Great work! Was it easy to replace the oil pickup pipe with the engine in situ?
|
@fpan it was easy enough, you need to remove the pitch stop mount and undo the main engine mounts to raise the engine so you can get to the rear sump bolts but it wasn't a bad job to do.
|
Your being so modest show us the pics of your full under body resto....... Of the fsti sg9. 👍
|
@lockheed ooh why didn't you say lol, here you go.
It was done April 2020 and still looking good today, I replaced all the bolts and most of the bushes etc. I'll give it proper wash and inspect it in the spring. https://cimg1.ibsrv.net/gimg/www.sco...4aa150d6b8.jpg https://cimg0.ibsrv.net/gimg/www.sco...8c50023e94.jpg https://cimg8.ibsrv.net/gimg/www.sco...ecf6055940.jpg https://cimg5.ibsrv.net/gimg/www.sco...e32dd8cfaa.jpg https://cimg6.ibsrv.net/gimg/www.sco...af9ff244d9.jpg https://cimg5.ibsrv.net/gimg/www.sco...9f9bb2ff40.jpg https://cimg5.ibsrv.net/gimg/www.sco...8ffa4697a3.jpg https://cimg8.ibsrv.net/gimg/www.sco...dad4efa17b.jpg https://cimg8.ibsrv.net/gimg/www.sco...23f131f1c0.jpg https://cimg3.ibsrv.net/gimg/www.sco...9c0dfad7a4.jpg |
Just magnificent!
|
Originally Posted by Jack star
(Post 12114981)
@lockheed ooh why didn't you say lol, here you go.
It was done April 2020 and still looking good today, I replaced all the bolts and most of the bushes etc. I'll give it proper wash and inspect it in the spring. https://cimg1.ibsrv.net/gimg/www.sco...4aa150d6b8.jpg https://cimg0.ibsrv.net/gimg/www.sco...8c50023e94.jpg https://cimg8.ibsrv.net/gimg/www.sco...ecf6055940.jpg https://cimg5.ibsrv.net/gimg/www.sco...e32dd8cfaa.jpg https://cimg6.ibsrv.net/gimg/www.sco...af9ff244d9.jpg https://cimg5.ibsrv.net/gimg/www.sco...9f9bb2ff40.jpg https://cimg5.ibsrv.net/gimg/www.sco...8ffa4697a3.jpg https://cimg8.ibsrv.net/gimg/www.sco...dad4efa17b.jpg https://cimg8.ibsrv.net/gimg/www.sco...23f131f1c0.jpg https://cimg3.ibsrv.net/gimg/www.sco...9c0dfad7a4.jpg Well done mate it looks fantastic! |
| All times are GMT +1. The time now is 03:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands