Originally Posted by Stevesbluewrx
(Post 8851494)
:nono::hjtwofing
Will look at my graph tomorrow and add my bits of info. :razz: Steve :thumb: |
Originally Posted by Anger
(Post 8851520)
My good laptop should be back this week Martyn, so will put it up then :thumb:
Will be watching my back at Shakey in September ! :thumb: |
Originally Posted by MartynJ
(Post 8851546)
No sweat, always find it's nice to look at the curve.
Will be watching my back at Shakey in September ! :thumb: |
Nothing since the last time yet, although I am hoping to have my swirl pot installed and have the boost turned up a bit more. Hoping to keep up with Dazza as he breaks into the 10's, lol.
|
As im hoping to be in the 11's i hope your both in the 10's :thumb:
|
The storm trooper will be in the 11's look out James ;)
|
Originally Posted by Rich RRH
(Post 8851524)
Well mine is the car that started this thread and its now 455/505 thats with a t on a 2.5l
You can't beat the huge torque the 2.5 delivers - 505lb ft!!! :eek: I bet that makes for one hell of an 'effortless' roadcar?! :norty: Awesome stuff. |
Originally Posted by joz8968
(Post 8852262)
I bet you're over the moon?! :thumb:
You can't beat the huge torque the 2.5 delivers - 505lb ft!!! :eek: I bet that makes for one hell of an 'effortless' roadcar?! :norty: Awesome stuff. Its almost too much for a road car mate, plus its now running on race fuel. |
Originally Posted by Rich RRH
(Post 8852361)
Its almost too much for a road car mate, plus its now running on race fuel.
|
Car - MY05 Sti Type UK
MD Variant - 321T+ Supporting Power Mods - 800cc PE injectors, Fuel Lab FPR set to 3.5 bar, Meercat custom 3 inch decat exhaust, GT spec2 headers and up pipe, APS Inner wing CAI 33% E85 Apexi AVCR and an Andy Forrest remap, still running a top mount Max boost by what RPM - 1.8 bar @ 3400ish Max power by what RPM - 450ish just under 6000rpm as this is where im inlet hose colapses and boost drops to 1.2bar:confused: Max torque by what RPM - about 430ish lbs-ft Drivetrain Mods - Exedy twin plare hyper clutch Other comments - in process of twisting the turbo, got H&S downpipe and up pipe, will be getting a custom induction kit made when this is fitted so should get a bit more yet:thumb: |
Originally Posted by Anger
(Post 8851525)
Is that a touch of Jealousy Gimpyboy :lol1:
Heres mine on my T. May I add that I am only on the factory STi ic and 550cc injectors at the mo. http://i49.photobucket.com/albums/f2...DSC00406-2.jpg Steve |
Steve, is that 402bhp on straight V-Power only?
If so, it's presumably the combo of 550s/STi TMIC that's holding you back (T is capable of up to 450bhp on V-Power, I think). But impressive that the 550s and TM got you over the 400 mark nonetheless. :) Steve, is this achieved also on a 2.0L? How does the T feel? Can you describe it (compared to your previous, smaller OEM turbo)...? Thanks in advance for any detailed feedback. And stuff lol. :D :) |
Originally Posted by joz8968
(Post 8856293)
Steve, is that 402bhp on straight V-Power only?
If so, it's presumably the combo of 550s/STi TMIC that's holding you back (T is capable of up to 450bhp on V-Power, I think). But impressive that the 550s and TM got you over the 400 mark nonetheless. :) Steve, is this achieved also on a 2.0L? How does the T feel? Can you describe it (compared to your previous, smaller OEM turbo)...? Thanks in advance for any detailed feedback. And stuff lol. :D :) Hey matey, V-power with 100mls of NF Octane booster. Also yes on standard 2.0l STi engine. :thumb: Not sure how a T would be on a newage WRX engine though as the STi cams/timing help a lot. Your right, the injectors and TMIC are the only thing holding me back.:cry: In terms of the T i think it depends on what you use the car for and how your drive. On the oem vf35 its better for when you want that quick over take moment as the vf35 suffers from some surging issues. My car is used everyday so the T is ideal for everyday driving conditions in my view. I wouldn't say it's laggy for such a big turbo on a 2.0l as its nice to drive without having to worry to much about when to change gear. I think the Lateral Headers and up-pipe come into play also for the T over VF35 and OEM headers/up-pipe set up. The turbo is ready to be used when you want it. When it kicks in it really kicks in nicely too. I brought the T as this would be future proof for me. I can't see why when a set of 650cc or 800cc injectors go on and a FMIC that 450bhp and 400lbft cannot be had out of it. For an everyday car/family car/shopping car its going to be great fun. :norty: Hope this helps. If it doesn't make sense (I have a hang over) let me know and I will write another bit of feedback. :freak3: Steve |
Makes perfect sense mate - thanks a lot. :thumb:.
I'm in the same boat in that I want 400... BUT on only 97RON! (so a T would fir the bill). First though, I'm going to max out my TD05 16g very soon, by getting Zen to fit/remap a Hyperflow FM; ported OEM headers/up-pipe; IK; 740s (all mods have been pre-purchased 2nd hand :)). I want to see how I feel about the (very tractable) 340-350bhp that the 16g should make, before deciding to springboard for more. ;) The beautiful thing is, is that I'd I'd only need to add a 321T/remap to attain the 400 (okay okay, lets not mention gearboxes... :lol1:). |
Originally Posted by G.Mac
(Post 8853079)
Car - MY05 Sti Type UK
MD Variant - 321T+ Supporting Power Mods - 800cc PE injectors, Fuel Lab FPR set to 3.5 bar, Meercat custom 3 inch decat exhaust, GT spec2 headers and up pipe, APS Inner wing CAI 33% E85 Apexi AVCR and an Andy Forrest remap, still running a top mount Max boost by what RPM - 1.8 bar @ 3400ish Max power by what RPM - 450ish just under 6000rpm as this is where im inlet hose colapses and boost drops to 1.2bar:confused: Max torque by what RPM - about 430ish lbs-ft Drivetrain Mods - Exedy twin plare hyper clutch Other comments - in process of twisting the turbo, got H&S downpipe and up pipe, will be getting a custom induction kit made when this is fitted so should get a bit more yet:thumb: /Jan |
Originally Posted by Stevesbluewrx
(Post 8858172)
Hey matey,
In terms of the T i think it depends on what you use the car for and how your drive. On the oem vf35 its better for when you want that quick over take moment as the vf35 suffers from some surging issues. My car is used everyday so the T is ideal for everyday driving conditions in my view. I wouldn't say it's laggy for such a big turbo on a 2.0l as its nice to drive without having to worry to much about when to change gear. The turbo is ready to be used when you want it. When it kicks in it really kicks in nicely too. For an everyday car/family car/shopping car its going to be great fun. :norty: Steve /Jan |
Finally got a boost plot of my 2lSti with the MD321T. STi TMIC, Sainsburys 97ron - No Additives.
http://i218.photobucket.com/albums/c.../BoostPlot.jpg RR operator said if they changed the ramp rate it would come in sooner. Dastek rollers on Ramp rate 2. |
Love the way the T maintains at least 1.45bar from 4k to the redline - so linear.
Indeed it actually increases to c.1.6bar by 5750rpm and carries on till it peaks at 6700rpm! |
Pete, what bhp/lb ft did she make on 97?! Really will act as guiniea pig for me if you can let me know :)
|
Had to abandon the the run @ 7200 as I was getting serious det Joz which turns out to be a fueling problem, Ecu retarded ignition by 15degrees @ one stage. The det was that bad it showed as spikes in the powergraph.
Got 390 when the throttle was lifted. I am using a perrin 3 port boost soleniod also to control the boost but recently found it its plumbed in wrong so I'm sure it will work better when plumbed correctly and remapped to sort out the fuelling. |
Bugger to the BCS/fuelling. :(
But when all properly sorted should see 410-430bhp, at a guess! ;) :D Let us know when it's sorted, and post up final figures if you would... :) |
The boost control manages the flat line, my H managed 2+ bar @ 4000 rpm before mapping, easily enough to destroy my engine.... if it had been used !
dunx |
Moving to Oz in Nov Joz and the car is being shipped it next month so it will be mapped on 98 or e5 havnt decided yet. I will certainly post up what I get when its there unless Andy F returns my messages to get it sorted here! although I have a sneaky suspicion Andy has been very busy lately. lol
|
Originally Posted by dunx
(Post 8958368)
The boost control manages the flat line, my H managed 2+ bar @ 4000 rpm before mapping, easily enough to destroy my engine.... if it had been used !
dunx |
Originally Posted by petedotuk
(Post 8958405)
...Andy F returns my messages to get it sorted here! although I have a sneaky suspicion Andy has been very busy lately. lol
And he''s pretty much out mapping most of the time too (obviously). |
Sorry not being picky, but they are capable of way more than my engine could manage :lol1::lol1:
Till next years upgrade, :D dunx |
Totally.
As you said, it wanted to really boost... but you had to get it reigned it in for fear of you motor! That's why we love 'big' compressors - they have large CFM-based appetites! :lol1: |
I told Simon (JGM) "It has to last ALL of this year...." :lol1::lol1::lol1:
So far so good ! dunx |
What did Simon remap to? 1.4bar? 1.5bar? What bhp now? (You had 397bhp when at 2bar, right?)
|
|
All times are GMT +1. The time now is 03:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands