|
Originally Posted by Nixon
My STi8 UK ran 1.7 bar on the VF35 to acheive 344.9bhp / 360ft/lb, and yes the boost was too high, car started to run like a bag of nails and ECU knock correction pushed the advanced multiplier back to 8.
Now running an Andy.F TD05/06 18g hybrid turbo with Andy.F Tek 3, running approx 370/370 and all the better for it :) Has cost me £3,300.00 to date but required second map (£500.00) to put things right.... guess 370/370 could be had for £2,800.00 :D |
Originally Posted by edmy716
i havent got the wrc package and havent wasted money buying intercoolers and filters and big exhausts thats exactly my point and the point im trying to get across
my spec is as follows: sti ppp green panel filter gt spec headers and upipe centre decat remap by the GOD richard bulmer figures 357bhp/361ftlb as for the rollers being very generous on the day there were a couple of people running big turbos(bigger than mine) big front mounts, big air filters and still did not achieve as much torque as mine and one only gave out 7bhp more!! choose your mapper carefully and i will say it again research ur mods carefully cheers steve |
edmy716
Which dyno was this on? Mike |
How far do you want to go?
Running 385bhp/340lb/ft on an AndyF TD05/20G with supporting mods. |
Originally Posted by jd5217
How far do you want to go?
Running 385bhp/340lb/ft on an AndyF TD05/20G with supporting mods. |
Are you sitting comfortably, then I shall begin:
WRC Technologies top mount intercooler (similar to APS) APS 3” full decat stainless exhaust APS twin vent dump valve Ecutek remap APS cold air induction Walbro fuel pump Andy Forrest TD05/20G hybrid turbo GT Spec unequal headers & up-pipe APS FRP/01 parallel fuel rails PE 650cc injectors Blitz dual SBC boost controller NGK PFR7 spark plugs There are some itmes on the list that are not necessary i.e. fuel rails & possibly injectors, however we have worked on the side of caution for reliability. |
Originally Posted by jd5217
Are you sitting comfortably, then I shall begin:
WRC Technologies top mount intercooler (similar to APS) APS 3” full decat stainless exhaust APS twin vent dump valve Ecutek remap APS cold air induction Walbro fuel pump Andy Forrest TD05/20G hybrid turbo GT Spec unequal headers & up-pipe APS FRP/01 parallel fuel rails PE 650cc injectors Blitz dual SBC boost controller NGK PFR7 spark plugs There are some itmes on the list that are not necessary i.e. fuel rails & possibly injectors, however we have worked on the side of caution for reliability. GT Spec unequal headers & up-pipe APS FRP/01 parallel fuel rails PE 650cc injectors (I have 550) Blitz dual SBC boost controller Is the boost controller worth it?, also the headers? |
the headers give an amazing sound, worth it for the sound alone.
boost controller gives better control and optional boost levels (run 355bhp for everyday use). |
Actually think I have the up pipe, where did the headers come from?:)
|
|
Thanks, how much bar gives you 385bhp?:wonder:
|
Originally Posted by edmy716
i havent got the wrc package and havent wasted money buying intercoolers and filters and big exhausts thats exactly my point and the point im trying to get across
my spec is as follows: sti ppp green panel filter gt spec headers and upipe centre decat remap by the GOD richard bulmer figures 357bhp/361ftlb |
Originally Posted by Jacey Boy
Thanks, how much bar gives you 385bhp?:wonder:
|
Mines not an MY04 STi, but an MY02 STi Type UK, but I thought I'd share my mods with you.
Last dynoed at 409bhp/408lbs • Milltek 3” exhaust system inc sports cat • GT Spec Gen II UnEqual Length Headers • GT Spec Gen II Up-Pipe • Walbro uprated fuel pump • SX Fuel Regulator • TEK3 Remap • TD05/06-20G Turbo • Power Enterprise 650cc injectors • APS 725DR Front Mount Intercooler • RCM Direct Air Box Feed • RCM / K&N Cone Air Filter • RCM Ultra Lightweight Pulleys • RCM Manifold spacers • 3 port boost solenoid • Breather Mod • Zerosports Cool Radiator • Zerosports Cool Thermo • STI High Pressure Radiator Cap • Samco Air Intake Pipe • Samco Coolant hoses • Samco Turbo hoses • Samco Ancillary hoses • Do-Luck Waterspray controller • 8 point Earthing kit (this is worth 50 brake ;) ;) ) |
Originally Posted by jd5217
1.5 bar.
|
Originally Posted by marklemac
• STI High Pressure Radiator Cap
|
oh yes indeed. amazing these little ebay gems :D
|
How do you find the lag?, must be quite aparent with 409BHP:eek:
|
Originally Posted by marklemac
Mines not an MY04 STi, but an MY02 STi Type UK, but I thought I'd share my mods with you.
Last dynoed at 409bhp/408lbs • Milltek 3” exhaust system inc sports cat • GT Spec Gen II UnEqual Length Headers • GT Spec Gen II Up-Pipe • Walbro uprated fuel pump • SX Fuel Regulator • TEK3 Remap • TD05/06-20G Turbo • Power Enterprise 650cc injectors • APS 725DR Front Mount Intercooler • RCM Direct Air Box Feed • RCM / K&N Cone Air Filter • RCM Ultra Lightweight Pulleys • RCM Manifold spacers • 3 port boost solenoid • Breather Mod • Zerosports Cool Radiator • Zerosports Cool Thermo • STI High Pressure Radiator Cap • Samco Air Intake Pipe • Samco Coolant hoses • Samco Turbo hoses • Samco Ancillary hoses • Do-Luck Waterspray controller • 8 point Earthing kit (this is worth 50 brake ;) ;) ) |
Jacey Boy:
not really any lag. I get full boost by about 3600rpm :) I'm very happy with the car, mind you, its taken me quite a long time to get there, and a tonne of money. I use the car every day, all day, and so far its been faultless in the 3+ yrs I've owned it. I do upto 2000miles per month in her :) WRC350bhp: Dynoed in March on a freezing cold day at Janspeed in Salisbury. (dynojet) Also dynoed at Powerstation.(maha) Will also be dynoed very soon at Triton Motorsport. (dyno dynamics) |
We have just finished a MY03 Sti with the following mods..
APS Front Mount APS Induction Turbo Dynamics MD195S Turbo RCM Headers up-pipe and 3 inch system 650cc injectors Ecutek remap and Greddy Profec E-01 Boost controller It made 391 bhp and 365lbft of torque on BP Ultimate on Monday @ 1.5 bar 344bhp and 300lbft of torque @ 1 bar |
MartynJ. YHPM
|
| All times are GMT +1. The time now is 08:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands