Originally Posted by craigybaby
(Post 11079422)
oohhhhh very nice proper engine porn :thumb:
|
yes please ....................... oh to late :lol1:
|
Originally Posted by stonejedi
(Post 11067569)
I found a couple of pics of when i upgraded my standard brembo disc and pads with the Performance friction set up and changed my rear disc too with grooved disc PF Z rated pads all round.The braking of my car transformed i would highly recommend this set up to anyone with the brembo caliper its one of the best mods ive done to my car since i have owned her.SJ.
rears. http://i909.photobucket.com/albums/a...ps9f562385.jpg fronts. http://i909.photobucket.com/albums/a...psb265c657.jpg My favourite wheels,perhaps I am biased. What size are? |
There 18 inch mate,i got these before they were even in the country in 2005 from OZ italy,i have 6 wheels in total two spares both bought but damaged from careless driving :brickwall but refurbed by mags and look as good as new.SJ.
|
Got a spare black dash surround if ya need it ;-)
|
Originally Posted by stevep360
(Post 11079564)
Got a spare black dash surround if ya need it ;-)
|
Looking good Adrian,great parts you will be using:thumb:
Jura |
Originally Posted by stonejedi
(Post 11079535)
There 18 inch mate,i got these before they were even in the country in 2005 from OZ italy,i have 6 wheels in total two spares both bought but damaged from careless driving :brickwall but refurbed by mags and look as good as new.SJ.
|
Originally Posted by jura11
(Post 11079636)
Looking good Adrian,great parts you will be using:thumb:
Jura |
Originally Posted by stonejedi
(Post 11079666)
Thanks Jura:thumb:how did you get on with sourcing a rotated kit?SJ.
Hi Adrian Everything will be revealed soon,hopefully we will be on road soon:thumb: Jura |
Originally Posted by jura11
(Post 11079717)
Hi Adrian
Everything will be revealed soon,hopefully we will be on road soon:thumb: Jura |
how apt "May 4th be with you".......................;)
|
Originally Posted by AS Performance
(Post 11079785)
how apt "May 4th be with you".......................;)
|
Just a few more parts collected.
UNDER PISTON SQUIRTERS. http://i909.photobucket.com/albums/a...ps30aa9a27.jpg OIL MODINE. http://i909.photobucket.com/albums/a...pscbbe19e6.jpg COSWORTH SUMP. http://i909.photobucket.com/albums/a...jedi/001-2.jpg COSWORTH BAFFLE PLATE. http://i909.photobucket.com/albums/a...psef669397.jpg RCM OIL PUMP. http://i909.photobucket.com/albums/a...psc6e29927.jpg FUELAB FUEL FILTER. http://i909.photobucket.com/albums/a...psf3a0be18.jpg BOSCH 044 FUEL PUMP. http://i909.photobucket.com/albums/a...psf2e172e1.jpg RCM FUEL PUMP. http://i909.photobucket.com/albums/a...psf4618a4e.jpg RCM 1000cc INJECTORS. http://i909.photobucket.com/albums/a...psb4c59cfd.jpg still more to come when my bank balance can handle it,this modifying don't come cheap.SJ. |
Lovely blob and great mods mate, subscribed.
|
Originally Posted by J pascoe
(Post 11081356)
Lovely blob and great mods mate, subscribed.
|
Now the bank holiday is over got a few more late deliverys.
ZERO SPORTS COOL THERMO. http://i909.photobucket.com/albums/a...ps6095a4e9.jpg COSWORTH TIMING BELT. http://i909.photobucket.com/albums/a...psa7d43db8.jpg RCM WATER PUMP. http://i909.photobucket.com/albums/a...ps58d0b87c.jpg RCM GRP-N CORK SUMP GASKET. http://i909.photobucket.com/albums/a...ps88238363.jpg HARDRACE MOUNTS. http://i909.photobucket.com/albums/a...psebe2f235.jpg I have some major tech on order and some steel work,when is this spending going to end?:cry:SJ. |
I've counted thousands of pounds worth on that build so far, how much do you think it's going to cost all In all? It's a mega impressive spec, excellent work :)
|
Originally Posted by scoobynelly
(Post 11082812)
I've counted thousands of pounds worth on that build so far, how much do you think it's going to cost all In all? It's a mega impressive spec, excellent work :)
|
A couple of cosmetic upgrades and some uprated bushes arrived.SJ.
COSWORTH OIL CAP. http://i909.photobucket.com/albums/a...ps6a154220.jpg COSWORTH RADIATOR CAP. http://i909.photobucket.com/albums/a...psc2e6647e.jpg SYTEC BRACKET FOR MY BOSCH 044 PUMP. http://i909.photobucket.com/albums/a...ps5b01ac58.jpg PERRIN 6 SPEED BUSHES. http://i909.photobucket.com/albums/a...ps05a49576.jpg KARTBOY. http://i909.photobucket.com/albums/a...psc3218af8.jpg |
My Exedy clutch,rotated turbo kit,Exhaust,and headers arrived:)im finally getting to my last bits before lift off.my Syvecs sholud be here by saturday.and im going to discuss final spec with Neil.I was going to get the pipework DEI wrapped but am seriously thinking about some ceramic coating i was talking to olley and he said its a proven science that works.so depending on funds i might try it out,opinions on ceramic coating welcome.My friend whos not into cars does not understand about how much money modifying can cost,but i explained to him about quality and he related to that:thumb:plus he knows i am going to keep my car for the long haul.i still cant believe that i have owned my car since 2004 it's going to be a on going project,so more to come.SJ.
RCM HEADERS. http://i909.photobucket.com/albums/a...psedf93216.jpg ROTATED TURBO KIT. http://i909.photobucket.com/albums/a...ps13158497.jpg RCM EXHAUST. http://i909.photobucket.com/albums/a...psab60bc76.jpg EXEDY TWIN PLATE CLUTCH. http://i909.photobucket.com/albums/a...ps5b2ca183.jpg |
Have you won the lottery ?? Lmao looks awesome I bet your like a kid in a sweet shop
|
Originally Posted by craigybaby
(Post 11090487)
Have you won the lottery ?? Lmao looks awesome I bet your like a kid in a sweet shop
|
Ha ye I don't smoke or drink and I'm still broke lmao !! Cheers mate it's not even a touch on yours or most of the projects on here but thanks I hope one day to get to a level like this :)
|
Originally Posted by craigybaby
(Post 11090505)
Ha ye I don't smoke or drink and I'm still broke lmao !! Cheers mate it's not even a touch on yours or most of the projects on here but thanks I hope one day to get to a level like this :)
|
Awesome parts Adrian,Twin plate is good,but really pain in arse drive in traffic or town
RCM rotated kit is regarded as best and about the ceramic coating,not sure,we are using heat wrap and we will see how will works,agreed ceramic coating seems working well,prices are much higher than for DEI heat wrap Speak with Neil,what he will recommend you and I would go down this route And agreed on the cost of modifying,quality parts cost money and you are using great and quality parts Jura |
hi Jura,yeah i hear yah about the clutch but i am use to driving rock hard clutchs,i had 7 years of a Group N paddle clutch in my renault 5 gt turbo,but with increased power and torque thats the trade off if you want to keep a hold of all those horses.SJ.
|
Well it came today my ecu thanks to Mark of LP.SJ.
SYVECS S6PNP AND 4 BAR MAP SENSOR. http://i909.photobucket.com/albums/a...ps189bcb8b.jpg |
Subscribed...
|
I Let my wife at my car yesterday to do a couple of minor jobs on my car.Since i have owned my car i can count the times on one hand to how many people have sat in the back:D,so i decided that the rear seats are coming out and the fronts and will be replaced with two racing seats,my wife now has made claim on my sti interior,so they will be coming out and going into her car.So i decided that i would lose the grab handles and fit the harness bar that i bought off of steve on here.She has got abit foward of herself and started to pull out my heater surrounds for some more of her aquired new skill of spraying plasti dip.No pictures yet of harness bar fitted as we run out of time to do it,but heres a few pics of her dismantling my car.:cry:.SJ.
BEFORE. http://i909.photobucket.com/albums/a...ps468b88db.jpg AFTER. http://i909.photobucket.com/albums/a...psc232d5f7.jpg http://i909.photobucket.com/albums/a...ps15ce5348.jpg http://i909.photobucket.com/albums/a...ps14d9725f.jpg HEATER TRIM REMOVAL. http://i909.photobucket.com/albums/a...ps2a7100c8.jpg http://i909.photobucket.com/albums/a...psac608d73.jpg http://i909.photobucket.com/albums/a...ps8459a7d6.jpg HARNESS BAR. http://i909.photobucket.com/albums/a...ps770146c8.jpg fitting will be done soon.SJ. |
All times are GMT +1. The time now is 07:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands