|
Hi there mate! Ya dont happen to have the standard recirc dump valve do ya?
Cheers |
I do!!
Pm me an offer!! Cheers, Steve |
ignition barrel
Hi, have you still got the ignition barrel and keys? If so how much? maybe the 3 door locks to match too.
Thanks, Simon |
Have you still got the ECU?
If so...How much?? |
Originally Posted by slyv12
(Post 9075011)
Hi, have you still got the ignition barrel and keys? If so how much? maybe the 3 door locks to match too.
Thanks, Simon yes I have a full set of 3 locks plus ignition barrel, and a key which I had cut a couple of years ago, so they all work fine. £20 plus the postage Cheers, Steve |
Originally Posted by scoobiewrx555
(Post 9075060)
Have you still got the ECU?
If so...How much?? I still have the ECU, but the car was originally an Auto, so would need to check numbers. I will pull it out tomorrow and check for you. Cheers, Steve |
Originally Posted by in-san-e
(Post 9071396)
Hi Danny,
I will get some pics of the Momo up later. It has had the connector block for the airbag swopped for the earlier type so that it will currently plug straight into the SRS clock wiring on a pre-facelift car. I still have the original connector though, so it could be changed back. The 4 pots complete with the discs and pads would be £225 plus shipping, or you could collect them. Cheers, Steve picture of Momo: http://img.photobucket.com/albums/v7...e/IMGP2539.jpg Can you get back to me re the brakes, as they will be going on ebay tomorrow night! Cheers, Steve |
Prices for gearbox, AFM and HEL brake lines reduced!! details in lead post.
Pics of AFM and HEL lines: http://img.photobucket.com/albums/v7...e/IMGP3105.jpg http://img.photobucket.com/albums/v7...e/IMGP3134.jpg Cheers, Steve |
Hi There, im after the front air vents and front centre dash part (the bit with the air vents and heater controls in)
How much for these? |
Originally Posted by Jamz_
(Post 9077785)
Hi There, im after the front air vents and front centre dash part (the bit with the air vents and heater controls in)
How much for these? how about £13 plus whatever postage comes to? Cheers, Steve |
Any news on the ECU??
|
Originally Posted by scoobiewrx555
(Post 9079660)
Any news on the ECU??
sorry for the delay. My ECU is for an auto car, and I believe runs a different map to the manual cars. Is yours an auto? Having said that mine ran fine as a manual with this ecu. I will have the numbers for you in the morning, sorry for the delay, I have just been very busy with work. Cheers, Steve |
No this isn't for an auto, manual only. I'll ak someone that knows if the ECU is ok for a manual. The fact that your car has been running OK as a manual is good though.
Cheers ETA: How much do you want for it in any case?? |
Originally Posted by scoobiewrx555
(Post 9079847)
No this isn't for an auto, manual only. I'll ak someone that knows if the ECU is ok for a manual. The fact that your car has been running OK as a manual is good though.
Cheers ETA: How much do you want for it in any case?? Numbers from ecu are: 2261 AB530. A18 000 RJ4 3X21 It has 4 connector sockets. I will get a pic up when I get home later. And feel free to PM me an offer! Cheers, Steve |
The sale has fallen through on the Flywheel and clutch so these are still available;
http://img.photobucket.com/albums/v7...e/IMGP3059.jpg http://img.photobucket.com/albums/v7...e/IMGP3056.jpg http://img.photobucket.com/albums/v7...e/IMGP3058.jpg Price as before, £100 plus postage if required. Cheers, Steve |
knock link sensor?! please pm me
|
and air flow meter! pm me that aswell. cheers
|
Hi there mate, a friend a mine had a standard recirc dv laying aroung in his garage so now got one but not the PIPE WORK!!! Do you have the pipe work? An how much?
Cheers!!! |
Originally Posted by Jubby
(Post 9090781)
Hi there mate, a friend a mine had a standard recirc dv laying aroung in his garage so now got one but not the PIPE WORK!!! Do you have the pipe work? An how much?
Cheers!!! Cheers, Steve |
Hi m8
does your centre console have the arm rest? |
May be to much inconvinience but have you got the jet washers off the bonnet? Are they standard? Will they fit a MY00? Thanks, Sam.
|
Originally Posted by redeye
(Post 9101348)
Hi m8
does your centre console have the arm rest? No mate, sorry. Steve |
Originally Posted by Saalro
(Post 9101555)
May be to much inconvinience but have you got the jet washers off the bonnet? Are they standard? Will they fit a MY00? Thanks, Sam.
I do have the washers, and it's no problem to get them off, but I'm afraid I have no idea if they will fit your car! Cheers, Steve |
stereo for sale?
|
and is sterring wheel still available
|
PM me for both stereo bonnet and steering wheel mate
|
Originally Posted by Blackwagonphoenix
(Post 9105807)
PM me for both stereo bonnet and steering wheel mate
Steve |
Hi mate,looking for an o/s/f strut complete as removed from the car.Do you still have one available.Thanks
|
do you have the boot cover that rolls out
|
Originally Posted by The Boxer
(Post 9107273)
Hi mate,looking for an o/s/f strut complete as removed from the car.Do you still have one available.Thanks
The front struts aren't really worth using I'm afraid. Just about worn out. Cheers, Steve |
| All times are GMT +1. The time now is 07:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands