Cool bug, miss mine tbh!
|
1 Attachment(s)
Heres the new wheels
Attachment 39174 Need new centre caps, but drives so much better on thinner wheels, Just need to get the brake pedal better and im fairly happy Ps flocked dashes are so hard to keep clean |
Originally Posted by cuprajake
(Post 11775718)
Heres the new wheels
http://i5.photobucket.com/albums/y19...psand0oaod.jpg Need new centre caps, but drives so much better on thinner wheels, Just need to get the brake pedal better and im fairly happy Ps flocked dashes are so hard to keep clean Martin |
Originally Posted by cuprajake
(Post 11775718)
Heres the new wheels
http://i5.photobucket.com/albums/y19...psand0oaod.jpg Need new centre caps, but drives so much better on thinner wheels, Just need to get the brake pedal better and im fairly happy Ps flocked dashes are so hard to keep clean |
Great choice of wheel mate looks grate
|
I would like a splitter, but i cant find anything
|
Originally Posted by cuprajake
(Post 11775823)
I would like a splitter, but i cant find anything
Martin |
Really, thats ace bud. Ill take you up on that offer.
Cheers pal |
Well picked the splitter up off martin tonight, top bloke with a stunning car
|
Originally Posted by cuprajake
(Post 11776205)
Well picked the splitter up off martin tonight, top bloke with a stunning car
Hopefully it's ok let us know when you've checked and fitted it mate :thumb: Martin |
Yeah deffo
On the hunt for a roof flap |
Originally Posted by cuprajake
(Post 11776309)
Yeah deffo
On the hunt for a roof flap Martin |
Well bit of an update over Christmas.
Ive sold the plate off the car to the original owner, this has allowed me to buy a roof flap, Next up i found out that the discs are now warped on the d2's so they have gone and been replaced with brembo calipers and discs, With it being my birthday 1st of jan, i asked for money. With that i got a jdm grille, some hella horns and a pink badge haha |
nice mate cant wait to see it in the flesh again. I'm sure the original owner will be very happy to get his plate back ;)
|
3 Attachment(s)
|
Originally Posted by cuprajake
(Post 11775330)
Those are the wheels im going for,
Ive put the feelers out for swaps for the xxr. It needs a new air filter, so thats after Christmas now |
Bit late there bud, already gone
|
Always same lol
|
I want revs for my blob sti.
|
Norton send me a pm.
|
Originally Posted by cuprajake
(Post 11777976)
Norton send me a pm.
|
Very nice bug that :thumb:
|
Well the car is back on the xxr.
Turns out the rota gra i swapped for were inovit tarmacs, got back in touch with the guy a d swapped back. Having to run a small 3mm spacer to clear the new brembos, as these wheels are a smaller offset. Plus side the brembo are now black |
Preferred the XXRs tbh, think they suit the car better. Now stop messing with your car and get my grills painted ;)
|
need to try them on first lol
|
Maybe you should re-spray the XXR's a different colour. If only you knew a sprayer! :)
|
8 Attachment(s)
Got a shed load done on the car today.
Fitting of a spec c roof flap Now alot of people use frayz guide, which is great. But there is one piece of miss information. Once your lining is down, he says to remove this part. *Attachment 38935 But infact the bracket for the roof vent uses this for centring and strength. *http://i5.photobucket.com/albums/y19...psq4bec83d.jpg See how the screws that held the map lights in, now hold the frame, after this you can bolt the other two holes *Attachment 38936 Then you cam centre punch all your holes and get the drill out. *Attachment 38937 *Attachment 38938 Dopily i forgot pics for the hole!!! But the rest is per guide, The inside *Attachment 38939 And out. *Attachment 38940 Next thing was to remove the old grille to fit my hella horns, and jdm grille. Also took the bit kf dash our were then flock had flacked amd blacked that. After that i took the gear knob off, cut the leaver down by about an inch and installed a new knob *Attachment 38941 Final pics *Attachment 38942 *http://i5.photobucket.com/albums/y19...psazdv5lxc.jpg Jake |
Look loads better now mate :thumb: forgot the update on the splitter or have I missed that :wonder: :lol1:
Martin |
Looks perfect
|
Spot on is that
Mick |
All times are GMT +1. The time now is 02:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands