MY 2011 Saloon / Hatch, show yourselves! Pics & chat
#1651
Scooby Regular
iTrader: (37)
From the 08/09 Hatches thread
It's probably a good bet that it's the later KDT910's , given the above and as the fitting instructions for them even say MY11............
http://www.whiteline.com.au/docs/ins...ides/Z5198.pdf
If you didn't know already, I you.
#1654
Scooby Regular
iTrader: (4)
The above looks to be a US site and items (1&) 2 that you are looking for a part number for was only fitted to the standard non widebodied 2.0L MY11 impreza wagon in Europe.
The WRX STI has the full undercover item 4 in your post.
Are you actually after the inner wing mudguard??
The WRX STI has the full undercover item 4 in your post.
Are you actually after the inner wing mudguard??
#1655
Scooby Regular
MY11 Hatch Rear ARB Size
Hi
It looks like I need to replace my rear ARB bushes, I was thinking of getting some Powerflex ones.
Does anyone (Don?) know the diameter, I believe they MY11 had uprated front & rear ARBs.
I thought I'd seen a previous thread about it on here, but can't find it now, where they were shown as 19mm, but Powerflex only list 16, 18 & 20mm versions...
Any help appreciated.
It looks like I need to replace my rear ARB bushes, I was thinking of getting some Powerflex ones.
Does anyone (Don?) know the diameter, I believe they MY11 had uprated front & rear ARBs.
I thought I'd seen a previous thread about it on here, but can't find it now, where they were shown as 19mm, but Powerflex only list 16, 18 & 20mm versions...
Any help appreciated.
#1656
Scooby Regular
Hi
It looks like I need to replace my rear ARB bushes, I was thinking of getting some Powerflex ones.
Does anyone (Don?) know the diameter, I believe they MY11 had uprated front & rear ARBs.
I thought I'd seen a previous thread about it on here, but can't find it now, where they were shown as 19mm, but Powerflex only list 16, 18 & 20mm versions...
Any help appreciated.
It looks like I need to replace my rear ARB bushes, I was thinking of getting some Powerflex ones.
Does anyone (Don?) know the diameter, I believe they MY11 had uprated front & rear ARBs.
I thought I'd seen a previous thread about it on here, but can't find it now, where they were shown as 19mm, but Powerflex only list 16, 18 & 20mm versions...
Any help appreciated.
MY08-10 WRX STI Front 20mm; rear 18mm
#1658
Scooby Regular
Powerflex Rear 19mm ARB Bushes
Just a heads up regards 19mm rear ARB bushes for the MY11 onwards.
Having been unsuccessful in finding any PU replacements for the OE fit bushes, I contacted Powerflex and they are now adding a 19mm bush to their range, should be available within a month.
Having been unsuccessful in finding any PU replacements for the OE fit bushes, I contacted Powerflex and they are now adding a 19mm bush to their range, should be available within a month.
#1659
Bit random, does anyone have a factory fit head unit that has bluetooth, Nav and rear camera fitted.?if so could you post up the model number and make of the unit
#1660
Scooby Regular
However the OEM Navi units listed in the parts database are upto MY10 86271SC030, MY11 onwards 86271SC121 (accessory version RHD H001EFG011)
All are Kenwood units one being model FXDD07EF2 I believe.
Model code for later version
Last edited by Don Clark; 05 October 2018 at 10:12 PM.
#1661
In the UK for MY11 onwards Subaru offered the Pioneer AVIC navigation models rather than an OEM unit.
However the OEM Navi units listed in the parts database are upto MY10 86271SC030, MY11 onwards 86271SC121 (accessory version RHD H001EFG011)
All are Kenwood units one being model FXDD07EF2 I believe.
Model code for later version
However the OEM Navi units listed in the parts database are upto MY10 86271SC030, MY11 onwards 86271SC121 (accessory version RHD H001EFG011)
All are Kenwood units one being model FXDD07EF2 I believe.
Model code for later version
I had a unit fitted to my 60 plate saloon and the head unit had a reverse camera, do you happen to know if the above have the same?
Cheers
#1662
Scooby Regular
More info here
https://www.iwsti.com/forums/gr-ice-...amera-faq.html
#1663
Yes there is a worldwide accessory camera
More info here
https://www.iwsti.com/forums/gr-ice-...amera-faq.html
More info here
https://www.iwsti.com/forums/gr-ice-...amera-faq.html
#1664
Scooby Regular
Is this going in the FSTi?
If so not sure how the wiring will stack up as the instrument panel loom is usually different if Navi is fitted instead of Radio.
The "accessory" version comes with a wiring harness adaptor.
You can download the fitting instructions from here
https://www.manualslib.com/download/...001efg001.html
#1665
It's listed against the earlier hatch models so assume yes.
Is this going in the FSTi?
If so not sure how the wiring will stack up as the instrument panel loom is usually different if Navi is fitted instead of Radio.
The "accessory" version comes with a wiring harness adaptor.
You can download the fitting instructions from here
https://www.manualslib.com/download/...001efg001.html
Is this going in the FSTi?
If so not sure how the wiring will stack up as the instrument panel loom is usually different if Navi is fitted instead of Radio.
The "accessory" version comes with a wiring harness adaptor.
You can download the fitting instructions from here
https://www.manualslib.com/download/...001efg001.html
#1668
Scooby Regular
Complete list of parts in this post from rob84 (Rob Ostle)
https://www.scoobynet.com/763923-08-...l#post11963331
HOWEVER the bumper cover and tow eye cover do not come pre-painted.
Part numbers are still good
#1669
Thanks Mate, do you also have the part number for the left and right attachment clips to clip the bumper to the wings?
Cheers
Cheers
Paintcode is 37J - Satin White Pearl - part number suffix WU (where applicable)
Complete list of parts in this post from rob84 (Rob Ostle)
https://www.scoobynet.com/763923-08-...l#post11963331
HOWEVER the bumper cover and tow eye cover do not come pre-painted.
Part numbers are still good
Complete list of parts in this post from rob84 (Rob Ostle)
https://www.scoobynet.com/763923-08-...l#post11963331
HOWEVER the bumper cover and tow eye cover do not come pre-painted.
Part numbers are still good
#1670
Scooby Regular
There are also two brackets that fit to the base of the headlights
Bracket - Front Bumper corner Right 57707FG062
Bracket - Front Bumper corner Left 57707FG072
Last edited by Don Clark; 10 November 2018 at 01:38 PM.
#1671
#1674
Scooby Regular
#1676
Scooby Regular
19mm Rear ARB Bushes
Hi
If any of you are still running original ARBs and like me have been struggling to find the right shape and size poly bush to replace the OE rubber, then Powerflex now make a 19mm rear bush for the rear of the MY11 cars (saloon or hatch).
It's not easy to find on their website so here's the link they provided me when they'd added it to their range last week.
https://www.powerflex.co.uk/product-...9mm/12968.html
If any of you are still running original ARBs and like me have been struggling to find the right shape and size poly bush to replace the OE rubber, then Powerflex now make a 19mm rear bush for the rear of the MY11 cars (saloon or hatch).
It's not easy to find on their website so here's the link they provided me when they'd added it to their range last week.
https://www.powerflex.co.uk/product-...9mm/12968.html
#1677
Scooby Regular
iTrader: (1)
Hi lads
jdm carbon engine cover fits 08-14 400 pound
Jdm carbon power steering cover 75
jdm battery cover 120 pound
will fit all sti model with standard top mount intercooler on olace
and standard sized battery
parts are unused and brand new at scoobyclinc
can be collected or posted from the clinic for 10 pound more with parcel force
pics to follow
jdm carbon engine cover fits 08-14 400 pound
Jdm carbon power steering cover 75
jdm battery cover 120 pound
will fit all sti model with standard top mount intercooler on olace
and standard sized battery
parts are unused and brand new at scoobyclinc
can be collected or posted from the clinic for 10 pound more with parcel force
pics to follow