When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
shame your not closer to me as my place charges £50 to powder coat all 4 wheels as long as you get the rest done yourself but if there in good condition you can go strait over the top of whats there ,, most of the blasters iv found charge around £50 ,,,, but £200 is still a good price for a all in service
Looks like Spark Silver - C3S so TI suffix (if it's Pure White then WG suffix)
Second item is for the three clips used to retain it
Don, does this mean all the bumper trims excluding the bumper skin itself come painted? What would the suffix be for the dark grey colour they did? I am looking at ordering and fitting the facelift front end and im currently gathering and double checking all the part numbers I need.
Don, does this mean all the bumper trims excluding the bumper skin itself come painted? What would the suffix be for the dark grey colour they did? I am looking at ordering and fitting the facelift front end and im currently gathering and double checking all the part numbers I need.
They used to, but as time goes by they become generic un-painted or in primer. The suffix becomes XX or they change the part number
Always worth checking though as they are still listed as such. Dark grey metallic is EN
Paint colour availability varies by year and model
Below are codes, with part suffix, available (in Japan) for their Impreza range (not just STi)
2008 (revision A)
2011(revision D)
You've seen this post from rob84 then (prices may have changed since then)
Originally Posted by Rob84
57702FG211 FRONT BUMPER £245.51
57731FG150WU FRONT BUMPER COVER £59.29
57731FG160WU FRONT BUMPER COVER L £72.81
57731FG310WU FOG COVER R/H £66.71
57731FG320WU FOG COVER L/H £66.71
57731FG330 COVER TOW EYE £14.77
59110FG040 MUDGUARD FRHS £46.39
86636FG140WU COVER ASSY-LAMP WASHER £39.20
86636FG150WU COVER ASSY-LAMP WASHER £41.56
91121FG080 GRILLE £156.91
59110FG050 MUDGUARD FLHS £46.39
+vat at 20% Thanks to the robbing government
Last edited by Don Clark; 18 November 2018 at 11:09 AM.
Thanks Don, Robs list was a good starting point although it looks like the dealer prices have gone up a lot since then, the bumper cover itself 57702FG213 is now £320.25 + vat. Heres what Subaru gave me for prices so far -
I will be sourcing the fog light bezels rather than the covers which I have found as 57731FG290 and 57731FG300 for lh and rh.
Last edited by Mattjw; 18 November 2018 at 11:39 AM.
just buy the cosworth system and get the downpipe modified for std fit turbo
I have a few Cosworth CS400 Exhaust Bits if still interested.Front Sections with Cat and Middle Sections. Also have a full system, but just bought a CS400 so might keep that for 'Ron'
Thanks Don, Robs list was a good starting point although it looks like the dealer prices have gone up a lot since then, the bumper cover itself 57702FG213 is now £320.25 + vat. Heres what Subaru gave me for prices so far -
I will be sourcing the fog light bezels rather than the covers which I have found as 57731FG290 and 57731FG300 for lh and rh.
Isnt a 330s a standard 300bhp STI mapped to 330 by Prodrive ?
330s is 330ps (325 bhp) with a Prodrive map.
not sure if it has a sports cat, as under the car it goes..
Back Box to center pipe, that fits to a pipe that just has the sensor on it, was told it would have the 2nd cat on their too
Not sure at a 'normal' STi hatch underside look likes with a exhaust configuration
Isnt a 330s a standard 300bhp STI mapped to 330 by Prodrive ?
Originally Posted by hedgecutter
Sorry, I thought I saw a before dyno with 272hp in your pics
Originally Posted by salsa-king
330s is 330ps (325 bhp) with a Prodrive map.
not sure if it has a sports cat, as under the car it goes..
Back Box to center pipe, that fits to a pipe that just has the sensor on it, was told it would have the 2nd cat on their too
Not sure at a 'normal' STi hatch underside look likes with a exhaust configuration
Hopefully clearing up a few items
This is the official blurb on the 330S
It's the higher end specced version, further tweeked by Prodrive.
As stated 330ps equates to about 325 BHP, 469Nm equates to 346Lbft
However as was usual with Prodrive they tended to underestimate their figures. (as it was a generic, rather than specifc re-map)
Also, not all dynos are equal.
This is a dyno graph taken back in 2013 on a Maha rather than a Dyno Dynamics machine.
Standard 330S - not Salsa's
Still higher than the quoted figures.
The 272 figure shown here on the Boost (in psi) versus AFR graphs
is, I believe, the power absorbed by the dyno i.e. "power at the wheels" before the calculations are applied to convert the figure to engine power.
My own car at 340BHP engine power equated to 270BHP at the wheels on a Dyno dynamics machine.
Last edited by Don Clark; 20 November 2018 at 09:10 AM.
not sure if it has a sports cat, as under the car it goes..
Back Box to center pipe, that fits to a pipe that just has the sensor on it, was told it would have the 2nd cat on their too
Not sure at a 'normal' STi hatch underside look likes with a exhaust configuration
330s doesnt have a 2nd cat, just a cat in downpipe plus 2nd decat pipe.
The 272 figure shown here on the Boost (in psi) versus AFR graphs
is, I believe, the power absorbed by the dyno i.e. "power at the wheels" before the calculations are applied to convert the figure to engine power.
My own car at 340BHP engine power equated to 270BHP at the wheels on a Dyno dynamics machine.
yes, that's the 'at the wheel' figure. graph is also showing Boost and the ARF.
344.4 bhp is at the engine.
the 330s also has the windscreen wiper heater elements. (they came std on the MY11 cars I think)
Last edited by salsa-king; 21 November 2018 at 07:02 AM.
Std 330S wheels dropped off today for refurb.
What colour do you guys think would go well with the Dark Grey Metallic car? Thinking flat black? Or car body colour??
Also, what wheel nut fitting do I need - 12X1.25 I think, but is it 60 degree tapered or radius? Want some new black nuts to go with the wheels.
Std 330S wheels dropped off today for refurb.
What colour do you guys think would go well with the Dark Grey Metallic car? Thinking flat black? Or car body colour??
Also, what wheel nut fitting do I need - 12X1.25 I think, but is it 60 degree tapered or radius? Want some new black nuts to go with the wheels.
Thanks
wheel nuts... only McGaurd will do!!
I've the Black Edition on mine, but you can get the STi set too.
Go GOLD on the alloys if you have a dark colour car.
16 November 2018, 03:23 PM
