08/09 Hatches, Stand up and show yourselves!!!
Scooby Regular
iTrader: (7)
shame your not closer to me as my place charges £50 to powder coat all 4 wheels as long as you get the rest done yourself but if there in good condition you can go strait over the top of whats there ,, most of the blasters iv found charge around £50 ,,,, but £200 is still a good price for a all in service
Scooby Senior
chuffed with the RR figures today on my std STi 330s
Last edited by salsa-king; 18 November 2018 at 12:34 AM.
Scooby Newbie
Scooby Regular
Don, does this mean all the bumper trims excluding the bumper skin itself come painted? What would the suffix be for the dark grey colour they did? I am looking at ordering and fitting the facelift front end and im currently gathering and double checking all the part numbers I need.
Always worth checking though as they are still listed as such. Dark grey metallic is EN
Paint colour availability varies by year and model
Below are codes, with part suffix, available (in Japan) for their Impreza range (not just STi)
2008 (revision A)
2011(revision D)
You've seen this post from rob84 then (prices may have changed since then)
Originally Posted by Rob84
57702FG211 FRONT BUMPER £245.51
57731FG150WU FRONT BUMPER COVER £59.29
57731FG160WU FRONT BUMPER COVER L £72.81
57731FG310WU FOG COVER R/H £66.71
57731FG320WU FOG COVER L/H £66.71
57731FG330 COVER TOW EYE £14.77
59110FG040 MUDGUARD FRHS £46.39
86636FG140WU COVER ASSY-LAMP WASHER £39.20
86636FG150WU COVER ASSY-LAMP WASHER £41.56
91121FG080 GRILLE £156.91
59110FG050 MUDGUARD FLHS £46.39
+vat at 20% Thanks to the robbing government
57731FG150WU FRONT BUMPER COVER £59.29
57731FG160WU FRONT BUMPER COVER L £72.81
57731FG310WU FOG COVER R/H £66.71
57731FG320WU FOG COVER L/H £66.71
57731FG330 COVER TOW EYE £14.77
59110FG040 MUDGUARD FRHS £46.39
86636FG140WU COVER ASSY-LAMP WASHER £39.20
86636FG150WU COVER ASSY-LAMP WASHER £41.56
91121FG080 GRILLE £156.91
59110FG050 MUDGUARD FLHS £46.39
+vat at 20% Thanks to the robbing government
Last edited by Don Clark; 18 November 2018 at 11:09 AM.
Scooby Newbie
Thanks Don, Robs list was a good starting point although it looks like the dealer prices have gone up a lot since then, the bumper cover itself 57702FG213 is now £320.25 + vat. Heres what Subaru gave me for prices so far -
I will be sourcing the fog light bezels rather than the covers which I have found as 57731FG290 and 57731FG300 for lh and rh.
I will be sourcing the fog light bezels rather than the covers which I have found as 57731FG290 and 57731FG300 for lh and rh.
Last edited by Mattjw; 18 November 2018 at 11:39 AM.
Scooby Regular
Scooby Regular
Scooby Regular
Thanks Don, Robs list was a good starting point although it looks like the dealer prices have gone up a lot since then, the bumper cover itself 57702FG213 is now £320.25 + vat. Heres what Subaru gave me for prices so far -
I will be sourcing the fog light bezels rather than the covers which I have found as 57731FG290 and 57731FG300 for lh and rh.
I will be sourcing the fog light bezels rather than the covers which I have found as 57731FG290 and 57731FG300 for lh and rh.
https://partsouq.com/en/search/all?q=57702FG213
Scooby Regular
iTrader: (5)
Scooby Regular
iTrader: (37)
Scooby Regular
iTrader: (37)
Scooby Senior
Scooby Senior
330s is 330ps (325 bhp) with a Prodrive map.
not sure if it has a sports cat, as under the car it goes..
Back Box to center pipe, that fits to a pipe that just has the sensor on it, was told it would have the 2nd cat on their too
Not sure at a 'normal' STi hatch underside look likes with a exhaust configuration
Scooby Regular
330s is 330ps (325 bhp) with a Prodrive map.
not sure if it has a sports cat, as under the car it goes..
Back Box to center pipe, that fits to a pipe that just has the sensor on it, was told it would have the 2nd cat on their too
Not sure at a 'normal' STi hatch underside look likes with a exhaust configuration
not sure if it has a sports cat, as under the car it goes..
Back Box to center pipe, that fits to a pipe that just has the sensor on it, was told it would have the 2nd cat on their too
Not sure at a 'normal' STi hatch underside look likes with a exhaust configuration
This is the official blurb on the 330S
It's the higher end specced version, further tweeked by Prodrive.
As stated 330ps equates to about 325 BHP, 469Nm equates to 346Lbft
However as was usual with Prodrive they tended to underestimate their figures. (as it was a generic, rather than specifc re-map)
Also, not all dynos are equal.
This is a dyno graph taken back in 2013 on a Maha rather than a Dyno Dynamics machine.
Standard 330S - not Salsa's
Still higher than the quoted figures.
The 272 figure shown here on the Boost (in psi) versus AFR graphs
is, I believe, the power absorbed by the dyno i.e. "power at the wheels" before the calculations are applied to convert the figure to engine power.
My own car at 340BHP engine power equated to 270BHP at the wheels on a Dyno dynamics machine.
Last edited by Don Clark; 20 November 2018 at 09:10 AM.
Scooby Regular
iTrader: (6)
330s is 330ps (325 bhp) with a Prodrive map.
not sure if it has a sports cat, as under the car it goes..
Back Box to center pipe, that fits to a pipe that just has the sensor on it, was told it would have the 2nd cat on their too
Not sure at a 'normal' STi hatch underside look likes with a exhaust configuration
not sure if it has a sports cat, as under the car it goes..
Back Box to center pipe, that fits to a pipe that just has the sensor on it, was told it would have the 2nd cat on their too
Not sure at a 'normal' STi hatch underside look likes with a exhaust configuration
Scooby Senior
Hopefully clearing up a few items
The 272 figure shown here on the Boost (in psi) versus AFR graphs
is, I believe, the power absorbed by the dyno i.e. "power at the wheels" before the calculations are applied to convert the figure to engine power.
My own car at 340BHP engine power equated to 270BHP at the wheels on a Dyno dynamics machine.
The 272 figure shown here on the Boost (in psi) versus AFR graphs
is, I believe, the power absorbed by the dyno i.e. "power at the wheels" before the calculations are applied to convert the figure to engine power.
My own car at 340BHP engine power equated to 270BHP at the wheels on a Dyno dynamics machine.
yes, that's the 'at the wheel' figure. graph is also showing Boost and the ARF.
344.4 bhp is at the engine.
the 330s also has the windscreen wiper heater elements. (they came std on the MY11 cars I think)
Last edited by salsa-king; 21 November 2018 at 07:02 AM.
Std 330S wheels dropped off today for refurb.
What colour do you guys think would go well with the Dark Grey Metallic car? Thinking flat black? Or car body colour??
Also, what wheel nut fitting do I need - 12X1.25 I think, but is it 60 degree tapered or radius? Want some new black nuts to go with the wheels.
Thanks
What colour do you guys think would go well with the Dark Grey Metallic car? Thinking flat black? Or car body colour??
Also, what wheel nut fitting do I need - 12X1.25 I think, but is it 60 degree tapered or radius? Want some new black nuts to go with the wheels.
Thanks
Scooby Regular
iTrader: (7)
I think the 330s wheels look best (on dark grey) in the colour they came in. Just not sure the silver is easily replicated.
Scooby Senior
Std 330S wheels dropped off today for refurb.
What colour do you guys think would go well with the Dark Grey Metallic car? Thinking flat black? Or car body colour??
Also, what wheel nut fitting do I need - 12X1.25 I think, but is it 60 degree tapered or radius? Want some new black nuts to go with the wheels.
Thanks
What colour do you guys think would go well with the Dark Grey Metallic car? Thinking flat black? Or car body colour??
Also, what wheel nut fitting do I need - 12X1.25 I think, but is it 60 degree tapered or radius? Want some new black nuts to go with the wheels.
Thanks
wheel nuts... only McGaurd will do!!
I've the Black Edition on mine, but you can get the STi set too.
Go GOLD on the alloys if you have a dark colour car.
Scooby Regular
Bulbs
Hi gus...looking for a bit of help please I’d you wouldn’t mind...
Can anyone give a difinitive list of the different light bulbs / number codes on the hatch....as different sites say different things...
I’m trying to go for a full refresh on the front and rear:
bulb types I need are:
main/full beam
dipped beam (believe this is normal front lights, are these the xenon ones??)
Side lights ( believe these ones that come on when your turn the light **** just once)
front indicators
rear lights I have not got a clue what’s involved with the rear??
if someone could shed some light on this I would be very thankful.
Cheers,
anth
Can anyone give a difinitive list of the different light bulbs / number codes on the hatch....as different sites say different things...
I’m trying to go for a full refresh on the front and rear:
bulb types I need are:
main/full beam
dipped beam (believe this is normal front lights, are these the xenon ones??)
Side lights ( believe these ones that come on when your turn the light **** just once)
front indicators
rear lights I have not got a clue what’s involved with the rear??
if someone could shed some light on this I would be very thankful.
Cheers,
anth
Scooby Senior
your Dipped lights are HID's so not sure you'd want to be changing those.
The main/full beam, I've swapped mine to the NightEye bulbs, you get on ebay about £21
https://www.ebay.co.uk/sch/i.html?_f...hteye&_sacat=0
side light bulbs are the normal 501 fitment
Rear fog and reverse bulbs are T20 size.
The main/full beam, I've swapped mine to the NightEye bulbs, you get on ebay about £21
https://www.ebay.co.uk/sch/i.html?_f...hteye&_sacat=0
side light bulbs are the normal 501 fitment
Rear fog and reverse bulbs are T20 size.
Last edited by salsa-king; 23 November 2018 at 07:12 AM.