What mods have you done this week?
28 July 2018, 06:18 AM
#452
Scooby Regular
that’s a unique one and it c9mpliments the hazard switch nicely 👍
28 July 2018, 09:18 AM
#453
Scooby Regular
Put new sti wheel in and bought some new rims hopefully get them on Monday as repaint them gold
Last edited by Hawkins 1995; 28 July 2018 at 09:19 AM. Reason: Auto correct
29 July 2018, 07:53 PM
#454
29 July 2018, 09:07 PM
#456
Scooby Regular
29 July 2018, 09:09 PM
#457
Scooby Regular
02 August 2018, 04:38 PM
#460
Scooby Regular
argh didn’t realise you was on fb mate!, what’s your name on there ?.
yeah mate it made 330, could of got 380 out of it but it isn’t forged so I need to decide whether to forge it or not. I’d like too definitely.
17 August 2018, 09:28 PM
#463
Scooby Regular
OK to be honest. The fiddly bit was the adaptor for the crank case/oil drain. The rest is just plumbing in routing the pipe work ext. The only thing that took a bit of figuring out was the pcv/outlet but only because the instructions cover different years. Basically the outlet of the aos and pcv go to a Y connector with the other end going to the turbo intake.
31 August 2018, 01:40 PM
#468
This week I have been ticking things off my list on the new car.
Full service
Re-sprayed the whole HTA bottom line kit in satin black
New genuine STI high pressure header tank cap
Rear badges removed
Rear fog lamp tinted (may go 1 shade darker on this again)
Today I have done:
Another oil change with 10-60 Mobil 1 race oil
Rear cluster clear sections light tinted
Full H&S exhaust system fitted (sounds so much better now) Already had decat downpipe.
Before:
After:
Also ordered, received and tried some 20mm wheel spacers but turns out the seller sent me the wrong spigot size so they have now gone back. Now looking at 9.5" wide wheels instead.
Oh I nearly forgot, I've also now got a FMIC kit coming for this car and an induction kit so I can get a bigger turbo and make the most of the forged engine!
I must start a project thread.
Full service
Re-sprayed the whole HTA bottom line kit in satin black
New genuine STI high pressure header tank cap
Rear badges removed
Rear fog lamp tinted (may go 1 shade darker on this again)
Today I have done:
Another oil change with 10-60 Mobil 1 race oil
Rear cluster clear sections light tinted
Full H&S exhaust system fitted (sounds so much better now) Already had decat downpipe.
Before:
After:
Also ordered, received and tried some 20mm wheel spacers but turns out the seller sent me the wrong spigot size so they have now gone back. Now looking at 9.5" wide wheels instead.
Oh I nearly forgot, I've also now got a FMIC kit coming for this car and an induction kit so I can get a bigger turbo and make the most of the forged engine!
I must start a project thread.
Last edited by BrownPantsRacing; 31 August 2018 at 02:19 PM.
31 August 2018, 03:02 PM
#469
This week I have been ticking things off my list on the new car.
Full service
Re-sprayed the whole HTA bottom line kit in satin black
New genuine STI high pressure header tank cap
Rear badges removed
Rear fog lamp tinted (may go 1 shade darker on this again)
Today I have done:
Another oil change with 10-60 Mobil 1 race oil
Rear cluster clear sections light tinted
Full H&S exhaust system fitted (sounds so much better now) Already had decat downpipe.
Before:
After:
Also ordered, received and tried some 20mm wheel spacers but turns out the seller sent me the wrong spigot size so they have now gone back. Now looking at 9.5" wide wheels instead.
Oh I nearly forgot, I've also now got a FMIC kit coming for this car and an induction kit so I can get a bigger turbo and make the most of the forged engine!
I must start a project thread.
Full service
Re-sprayed the whole HTA bottom line kit in satin black
New genuine STI high pressure header tank cap
Rear badges removed
Rear fog lamp tinted (may go 1 shade darker on this again)
Today I have done:
Another oil change with 10-60 Mobil 1 race oil
Rear cluster clear sections light tinted
Full H&S exhaust system fitted (sounds so much better now) Already had decat downpipe.
Before:
After:
Also ordered, received and tried some 20mm wheel spacers but turns out the seller sent me the wrong spigot size so they have now gone back. Now looking at 9.5" wide wheels instead.
Oh I nearly forgot, I've also now got a FMIC kit coming for this car and an induction kit so I can get a bigger turbo and make the most of the forged engine!
I must start a project thread.
Onward and upwards
Siv
31 August 2018, 03:44 PM
#470
Looks like the Foz MAY be going to someone we know from here who will be putting it back on the road, which will be great. Will let you know if it happens on my project thread.
31 August 2018, 03:55 PM
#471
Thanks mate. Yep, gutted about the Foz but having the new one is making things a little more bearable!
Looks like the Foz MAY be going to someone we know from here who will be putting it back on the road, which will be great. Will let you know if it happens on my project thread.
Looks like the Foz MAY be going to someone we know from here who will be putting it back on the road, which will be great. Will let you know if it happens on my project thread.
Fingers crossed someone takes it on and shows it the tlc it deserves
Siv
03 September 2018, 02:11 PM
#479
Scooby Regular
from another scoobynet thread
JDM cars didn't get the square lock.
