Notices

Stupid question ...

Old 17 August 2017, 02:31 PM
  #1  
Avalyn
Scooby Regular
Thread Starter
 
Avalyn's Avatar
 
Join Date: Sep 2004
Location: Sunny Ecosse
Posts: 287
Likes: 0
Received 0 Likes on 0 Posts
Default Stupid question ...

I'm a ham fisted uneducated oaf when it comes to electrical stuff.


I've managed some car DIY by fitting some new speakers and a head unit in my Hawkeye STi, but resorted to paying a local garage to do 'other' stuff for me like fit my Prosport gauges.


I'm come into one of these active Subwoofers that live under your seat. One of my buddies bought it for his car, but realized it doesn't fit and he's going the whole hog with an amp and sub in his boot etc. and is getting a local (ish) ICE place to fit in.


Anyway, I digress. I am going to have a go at fitting the sub, which leads me to 2 questions.


Where do I ground the bugger, is there anywhere around the centre console/handbreak etc. I can use.


And I must have power being supplied to the gauges in the centre pod, can I use a scotch lock or something to T-piece power for the sub from the power supplied to the gauges (which I assume is coming from the battery terminal)?


Many thanks in advance, and I suspect the right answer is pay someone else to do it
Old 17 August 2017, 04:17 PM
  #2  
ZANY
Scooby Regular
 
ZANY's Avatar
 
Join Date: Oct 2014
Location: P1234x
Posts: 6,082
Received 131 Likes on 101 Posts
Default

Amp earth from back where lights are held from were the 10mm nuts are or a good ground

Run the live from battery with inline fuse

Run remote wire from stereo

I've used 0gauge front to back then 4gauge to the amp

I Also run power wires from drivers side and rca doepwn passenger and not together do there's no interference

Sorry if it doesn't make sense as I'm not good at writing up stuff
Old 17 August 2017, 04:23 PM
  #3  
Avalyn
Scooby Regular
Thread Starter
 
Avalyn's Avatar
 
Join Date: Sep 2004
Location: Sunny Ecosse
Posts: 287
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks Zany, unfortunately that's still in the realms of rocket science for me and I was hoping to avoid running the live from the battery and piddling about with firewalls and gromets if it's already been done to power my gauges ..
Old 17 August 2017, 04:27 PM
  #4  
ZANY
Scooby Regular
 
ZANY's Avatar
 
Join Date: Oct 2014
Location: P1234x
Posts: 6,082
Received 131 Likes on 101 Posts
Default

If you was local I would have sorted it for you pal it's not rocket science but I'd advise you to take it to someone that knows what they are doing if your not sure
I've been putting stereos etc in for over 20years

I've even known people's cars to set on fire as they hadn't done things right the first time
Also may invalidate your insurance if a fire occurs etc not trying to scare you pal just making you aware of the worst
Old 17 August 2017, 04:42 PM
  #5  
Avalyn
Scooby Regular
Thread Starter
 
Avalyn's Avatar
 
Join Date: Sep 2004
Location: Sunny Ecosse
Posts: 287
Likes: 0
Received 0 Likes on 0 Posts
Default

Yup thanks Zany - good advice - thx
Old 17 August 2017, 05:10 PM
  #6  
TECHNOPUG
Scooby Regular
iTrader: (1)
 
TECHNOPUG's Avatar
 
Join Date: Nov 2014
Location: Tetbury
Posts: 1,968
Received 96 Likes on 79 Posts
Default

If you are interested in doing it yourself and want to learn, then I can give you a quick guide as it's a pretty straightforward job. If not, pay someone competent. What you've asked above is a good way of seeing your car go up in flames.

Do you have suitable HU for a start?
Old 18 August 2017, 08:37 AM
  #7  
Avalyn
Scooby Regular
Thread Starter
 
Avalyn's Avatar
 
Join Date: Sep 2004
Location: Sunny Ecosse
Posts: 287
Likes: 0
Received 0 Likes on 0 Posts
Default

Haha thanks TECHNOPUG ... with 2 people advising me there's the possibility of my car exploding in a ball of flames I think I'll just bite the bullet and get someone competent to do it for the sake of a few quid !
Old 18 August 2017, 08:55 AM
  #8  
JDM_Stig
Scooby Regular
iTrader: (3)
 
JDM_Stig's Avatar
 
Join Date: Feb 2009
Location: Mount Weather
Posts: 5,840
Received 41 Likes on 33 Posts
Default

Old 20 August 2017, 08:47 AM
  #9  
alcazar
Scooby Regular
iTrader: (2)
 
alcazar's Avatar
 
Join Date: Jun 2002
Location: Rl'yeh
Posts: 40,781
Received 27 Likes on 25 Posts
Default

I've got one in my classic.
It takes a live from the supply to the mirror switch, and is earthed to one of the bolts holding the arm rest cubby hole and centre console in place. It's remote is in the arm rest.

Mine is an Alpine.

http://www.ebay.co.uk/itm/Car-Auto-T...oAAOSw9N1VwdCb
One like this is worth having. Finds a live wire. The croc clip goes to earth and the pointed end pierces the insulation, or touches the terminal.

Last edited by alcazar; 20 August 2017 at 08:49 AM.
Old 21 August 2017, 08:20 AM
  #10  
Avalyn
Scooby Regular
Thread Starter
 
Avalyn's Avatar
 
Join Date: Sep 2004
Location: Sunny Ecosse
Posts: 287
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks Alcazar .. much appreciated
Old 21 August 2017, 12:03 PM
  #11  
TECHNOPUG
Scooby Regular
iTrader: (1)
 
TECHNOPUG's Avatar
 
Join Date: Nov 2014
Location: Tetbury
Posts: 1,968
Received 96 Likes on 79 Posts
Default

Originally Posted by alcazar
I've got one in my classic.
It takes a live from the supply to the mirror switch, and is earthed to one of the bolts holding the arm rest cubby hole and centre console in place. It's remote is in the arm rest.

Mine is an Alpine.

http://www.ebay.co.uk/itm/Car-Auto-T...oAAOSw9N1VwdCb
One like this is worth having. Finds a live wire. The croc clip goes to earth and the pointed end pierces the insulation, or touches the terminal.
I presume that it has a tiny amp drawing a very low current or your mirrors are retro-fitted with some decent thickness power cable?
Old 23 August 2017, 07:20 AM
  #12  
alcazar
Scooby Regular
iTrader: (2)
 
alcazar's Avatar
 
Join Date: Jun 2002
Location: Rl'yeh
Posts: 40,781
Received 27 Likes on 25 Posts
Default

The second.
Done when I fitted folding mirrors.
Old 23 August 2017, 08:03 AM
  #13  
JDM_Stig
Scooby Regular
iTrader: (3)
 
JDM_Stig's Avatar
 
Join Date: Feb 2009
Location: Mount Weather
Posts: 5,840
Received 41 Likes on 33 Posts
Default

So the advice is only really useful to anyone who has done the same,
Id never pick up a 12v supply for a amp off the cars wiring, always back to the battery with a fuse as close to the battery as possible, to protect the cable.
Old 24 August 2017, 07:57 AM
  #14  
alcazar
Scooby Regular
iTrader: (2)
 
alcazar's Avatar
 
Join Date: Jun 2002
Location: Rl'yeh
Posts: 40,781
Received 27 Likes on 25 Posts
Default

The Amp I got didn't spec that. Instructions said to pick up a live anywhere.
Old 31 August 2017, 08:22 AM
  #15  
Avalyn
Scooby Regular
Thread Starter
 
Avalyn's Avatar
 
Join Date: Sep 2004
Location: Sunny Ecosse
Posts: 287
Likes: 0
Received 0 Likes on 0 Posts
Default

Just to close this out .. I paid a professional to install my amp/woofer yesterday. Cracking job from a car enthusiast.


It's actually been mounted behind the rear seats. Sure it's not exactly up there with the Harmon Kardon system in my last car, but it's brought a depth to the sound along with the 16.5 cm components in the front and the doors all dynomatted.


Might actually listen to a few tunes now, instead of the boxer beat all the time


Thread Tools
Search this Thread

All times are GMT +1. The time now is 01:27 AM.