Defi Genome install issue
#1
Defi Genome install issue
I have searched but not sure i have found the answer i need.
Currently my Defis light up on initial sweep but dont come on with the lights.
i have reconnected all the plugs to the controller.
I am using the clock harness and have the following wiring
Red to clock blue / red
Black to clock black
Orange to clock yellow
white to clock purple.
its a newage hawk and i didnt want to start just swapping wires around, so any help would be greatly appreciated.
Currently my Defis light up on initial sweep but dont come on with the lights.
i have reconnected all the plugs to the controller.
I am using the clock harness and have the following wiring
Red to clock blue / red
Black to clock black
Orange to clock yellow
white to clock purple.
its a newage hawk and i didnt want to start just swapping wires around, so any help would be greatly appreciated.
#3
Scooby Regular
iTrader: (2)
Do you have a circuit tester, or multimeter?
This is worth having: http://www.ebay.co.uk/itm/Auto-Car-L...8AAOSwEeFVRoU3, or one very like. The croc clip goes to a decent earth, the probe, which is needle sharp, can pierce insulation to find live wires.
Now onto your question.
Make sure that your wiring is as follows:
RED: permanent live, ie: even when ignition off.
ORANGE: switched live, ie: live on SECOND CLICK of ignition, not first.
WHITE: live when lights are on.
BLACK: DECENT earth. Mine goes back to the battery.
Check those out and report back.
This is worth having: http://www.ebay.co.uk/itm/Auto-Car-L...8AAOSwEeFVRoU3, or one very like. The croc clip goes to a decent earth, the probe, which is needle sharp, can pierce insulation to find live wires.
Now onto your question.
Make sure that your wiring is as follows:
RED: permanent live, ie: even when ignition off.
ORANGE: switched live, ie: live on SECOND CLICK of ignition, not first.
WHITE: live when lights are on.
BLACK: DECENT earth. Mine goes back to the battery.
Check those out and report back.
#4
Hi Alcazar,
Thanks for getting back to me. i have purchased that tester as that could prove very useful any way.
I have moved the white wire on the controller to the yellow clock wire with the orange and now they light up perfectly on ignition and start up, which is how the old prosport gauges used to work.
I am trying to locate my meter to check the voltage on the clock purple wire.
Thanks for getting back to me. i have purchased that tester as that could prove very useful any way.
I have moved the white wire on the controller to the yellow clock wire with the orange and now they light up perfectly on ignition and start up, which is how the old prosport gauges used to work.
I am trying to locate my meter to check the voltage on the clock purple wire.