Need to replace the digital clock, the tray bit that it sits in on the top of the dash, can this be levered out with a screw driver or is it screwed in from underneath?

 

it just unclips out, take your time when pulling it thou.2 clips at the front and 2 at the back. i found it easier to pull it towards you to release the clips at back. you can see the clips as you pull/push the tray. screwdriver will help release them, but dont use it to lever it or u`ll mark the dash......

 

Cheers for that.

 

easy fix on a bug resistor 501 simply pull the clock apart and solder round resister 5 minute job there is a step by step guide on here somewhere

 

Here you go....

http://rowejason.com/2007/02/17/suba...tal-clock-fix/

regards
Rick