ISLANDMAGEEZER!

I got these gauges fitted yesterday,by the mechanic i use and was wondering how to stop the beeping?I did a search and found a post on how to do it,but it doesn't seem to work.It says put key in ignition hold down button on gauge and turn key,but nothing changed for me.Any help on this would be great.

scoobyschef

iTrader: (6)

interested too,did not work forme either

jim

rbaz

iTrader: (1)

Press the button down, turn the ignition on, wait for the dial to go black then release the button, repeat for each gauge

ISLANDMAGEEZER!

Cheers Rbaz tried that again,nothing! Could it be the way they where wired?As in everytime i cut the ignition it resets the gauge back to the start?Cheers,Davy.

crf450r

iTrader: (1)

thats what i did on mine and it worked ok for me
try holding for longer or shorter but make sure your doing each one it can sound like its still doing it and its the one next to it

rbaz

iTrader: (1)

Sounds like you have wired them wrong. Check the permanent live

BGH1R

iTrader: (3)

HI guys just wanted to know where i can get some of these gauges from ?

thanks .bob

scoobynewbie72

iTrader: (1)

Yes as the man said, I used a switched live so I knew they were off when i left the car,
I have to reset my boost limiter each time also due to this.

crf450r

iTrader: (1)

there is a thread in for sale forum but your just as well to look on ebay look for the fella from hong kong he does them in sets of threes

scoobyc

iTrader: (2)

https://www.scoobynet.com/interior-1...ure-boost.html

Yes sounds like you have wired them wrong. You need a perm live for the gauges to be able to remember things like max boost and warning settings. Above shows how i wired mine.

rbaz

iTrader: (1)

PM sent with instructions to get 10% discount

wiley

iTrader: (63)

anybody know how to turn off the annoying beeping on defis??? its only from the oil pressure gauge when the ignition is on

wiley

AndyMoody

iTrader: (2)

You have to hold for 5 secs after turning ignition on then let go on gauge you have fitted. I recently changed my battery and the beeping came back. If you done that then you must have them wired wrongly.