narelle

Hi could any one help I've got a 1993 impreza ra I've just installed a new engine in but was wondering wear do the two heater pipes from the firewall fit onto the engine please I'm guessing one next to the throttle body but what about the other any help or pics would be brilliant cheers

merlin24

iTrader: (1)

One to the coolant cross over pipe and the other onto the pipe coming off the water pump, you can see the pipes at the back of the bell housing in the pic below ( ignore the green arrow - thats for oil temp sender location ).



Mick

narelle

Is that the pipe next to the turbo or the black one across the engine also which pipe is which on the water pump and were does the other go is it to the oil cooler cheers

narelle

Anyone

merlin24

iTrader: (1)

red arrows are you heater pipe connections, the other pipe above them running horizontally comes from the water pump to your coolant header tank.




Mick

narelle

Brilliant that's for the help can see the problem I haven't got the pipes no wonder I struggled with the fitment

merlin24

iTrader: (1)

Glad to help
Going to be a bugger to fit the water pump metal pipes if the Inlet manifold is on the engine

Mick