Notices

Flat Spot 2000 - 3000 rpm Please Help!

Thread Tools
 
Search this Thread
 
Old 25 November 2011, 04:59 PM
  #1  
dr_greenrinse
Scooby Newbie
Thread Starter
 
dr_greenrinse's Avatar
 
Join Date: Jun 2010
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Default Flat Spot 2000 - 3000 rpm Please Help!

Hi Guys - hope you can help me.

Recently my car has developed what id describe as an intermittent flatspot between 2000 and 3000 rpm. It seems to be more noticable when cold but has happened when hot as well.
Also it seems to be vary in severity - sometimes just a bit hesitant or jumpy and other times i put my foot down and theres virtually nothing no power at all until it (very slowly) pulls itself above 3k revs. Im not sure but when i hit the flat spot i seem to get an increase in the wooshing noise from the turbo as if theres an air leak somewhere but I cant find anything.

I have had the MAF sensor out and given it a good clean plus i have checked the jubilee clips on the intake pipe and any others i could see most were a bit loose but are now firmed up.

Car is a 2006 STI running a Dynamix remap, decat downpipe, uprated fuel pump, aftermarket panel filter and exhaust backbox

Any advice you can give me on where to look for the problem would be greatly appreciated.
Old 25 November 2011, 08:54 PM
  #2  
rob84
Scooby Regular
iTrader: (5)
 
rob84's Avatar
 
Join Date: Jun 2006
Location: somewhere out there
Posts: 5,287
Received 12 Likes on 10 Posts
Default

That sounds like its cracked a ringland on a piston mate as those are typical symptoms. I'd be having a compression check done if I was you
Old 25 November 2011, 10:17 PM
  #3  
DT-SPD
Scooby Regular
iTrader: (7)
 
DT-SPD's Avatar
 
Join Date: Jun 2010
Location: Rugby
Posts: 798
Likes: 0
Received 0 Likes on 0 Posts
Default

get in touch with duncan and ask him to check it over.
Old 26 November 2011, 07:45 AM
  #4  
dynamix
Former Sponsor
iTrader: (3)
 
dynamix's Avatar
 
Join Date: Feb 2006
Location: near you
Posts: 9,708
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by DT-SPD
get in touch with duncan and ask him to check it over.
Am heading over on tuesday to see him and see if we can locate what the issue is.
Old 26 November 2011, 02:10 PM
  #5  
dr_greenrinse
Scooby Newbie
Thread Starter
 
dr_greenrinse's Avatar
 
Join Date: Jun 2010
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Default

Appreciate it Duncan - hopefully its nothing too serious.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
leg200
Subaru Parts
5
07 October 2015 07:31 AM
Cpt Jack Sparrow
Was it you?
7
05 October 2015 10:40 AM
Ganz1983
Subaru
5
02 October 2015 09:22 AM
madmover
Member's Gallery
4
28 September 2015 10:46 AM
shorty87
Other Marques
0
25 September 2015 08:52 PM



Quick Reply: Flat Spot 2000 - 3000 rpm Please Help!



All times are GMT +1. The time now is 09:05 AM.