f4la k

iTrader: (1)

Can someone tell me what make these are and what year they would fit . I know they are 740cc. I thought they were nismo but not 100%. Any help appriciated...

f4la k

iTrader: (1)

Anybody

Splitpin

Certainly look like Nismos. SR, RB and VG are all Nissan engine types.

These should drop straight into phase 2 rails (and so, via adapters into ph1/1.5), although you need to do a bit of mucking about to get the connectors to fit.

BTW searching Google for "1402-RN009" would tell you quite a lot. That suggests HKS as the source.

Edit: Yep, HKS.

http://www.hkseurope.com/fuel/injector.asp

FB Tuning

iTrader: (30)

Nissan connectors available from Mark @ Lateral, or a mid' 90's Micra in your local scrappy

jeffwrx

iTrader: (50)

I have some of these injectors as well , as others have said , they're nismo
740cc's

joz8968

iTrader: (13)

I swapped a set of those for some 550s (which are more suited to my particular next round of mods).

f4la k

iTrader: (1)

so will i be able to use these in my 98 sti as long as i can get the electrical connectors on or do i buy ones from mark at lateral. does this involve cutting wires and joining them on..

Ami

iTrader: (5)

Not necesserily - you can just refit your pins from your old connectors.
They seem to be pretty much the same - anyway worked for me.

f4la k

iTrader: (1)

The plugs on the loom dont go over injectors. Unless i butcher injector to get plug on. I woul rather buy connectors from mark if he has them which joz says he has. dontwant to botch anything up..

joz8968

iTrader: (13)

Did I? Not sure on the electrical connectors, etc.

I think I said in your other thread that you need the adaptor kit (Carl Davy does it, plus I think Lateral too), to fit the Ph.2 injectors into Ph.1/1.5 rails.

Plus, I think you need the Ph.2 metal half-moon injector retaining covers as well(?)

f4la k

iTrader: (1)

Sorry joz giving you credit for fiestaboys much appriciated info. cheers fiestaboy. sent Mark an email earlier hoping to hear back soon.. Ive got the kit to fit phase 2 to phase1, its the electrical connectors that are diffrent, but im on it.

Ami

iTrader: (5)

OK - maybe I wasn't clear enough - plugs are different, indeed.
But I see no need to cut anything - been through it couple of days ago.
Mechanic just took the pins off the old plugs and fitted it into new plugs.
No cutting, everything works perfectly fine.

joz8968

iTrader: (13)

f4la k

iTrader: (1)

Got you now ami, i was thinking i was getting the plugs with pins in, but its obviously just the casing that i put my pins in. Sorry for bein thick....