WR1 ecu on a 2003 blob eye wrx sti
#1
Scooby Regular
Thread Starter
Join Date: Aug 2009
Location: jersey channel islands
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
WR1 ecu on a 2003 blob eye wrx sti
Hi,i have recently aquired a wr1 ecu and have been getting mixed advice on fitting it to my august 2003 blob eye sti.
can anyone help please??? i have purchased a walbro high flow fuel pump and a roger clark induction kit but am being advised not to fit the ecu surely with an exhaust which has a spec the same as the prodrive one fitted to the wr1 i should be able to plug and play...should i not.
any advice greatly appreciated as i am currently
with thanks
simon
can anyone help please??? i have purchased a walbro high flow fuel pump and a roger clark induction kit but am being advised not to fit the ecu surely with an exhaust which has a spec the same as the prodrive one fitted to the wr1 i should be able to plug and play...should i not.
any advice greatly appreciated as i am currently
with thanks
simon
#3
Scooby Regular
Thread Starter
Join Date: Aug 2009
Location: jersey channel islands
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
yes m8 they are the same ecu but its been tweeked by prodrive for 315bhp as appose to my 265bhp on sti. was gonna leave standard air box in as i have an uprated panel filter in there which would be same as the wr1 but now people have put doubts in my head i thought f*ck it...induction kit,3 inch with full straight through exhaust and a re-map....just wondering if any one out there had fitted a wr1 ecu to there sti with or without any probs.
cheers though m8
simon
cheers though m8
simon
#5
Scooby Regular
Thread Starter
Join Date: Aug 2009
Location: jersey channel islands
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
thanks
simon
#6
The WR1 is just a remapped STI PPP?? Great - I want a copy of that ROM then. 0-60 in 4.4 as opposed to 4.8 for just a reflash? Bring it...
Could I come visit with my Tactrix cable and a copy of Romraider? There's a pint in it.... Could swap you for my PPP map but can't imagine why you'd want a paltry 305hp,295lb/ft - although I do have my 'special' AVCS settings in there...
Could I come visit with my Tactrix cable and a copy of Romraider? There's a pint in it.... Could swap you for my PPP map but can't imagine why you'd want a paltry 305hp,295lb/ft - although I do have my 'special' AVCS settings in there...
#7
Scooby Regular
Thread Starter
Join Date: Aug 2009
Location: jersey channel islands
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
The WR1 is just a remapped STI PPP?? Great - I want a copy of that ROM then. 0-60 in 4.4 as opposed to 4.8 for just a reflash? Bring it...
Could I come visit with my Tactrix cable and a copy of Romraider? There's a pint in it.... Could swap you for my PPP map but can't imagine why you'd want a paltry 305hp,295lb/ft - although I do have my 'special' AVCS settings in there...
Could I come visit with my Tactrix cable and a copy of Romraider? There's a pint in it.... Could swap you for my PPP map but can't imagine why you'd want a paltry 305hp,295lb/ft - although I do have my 'special' AVCS settings in there...
and at the moment only kickin out a 265bhp standard sti power as i am worried about lobbing this ecu in
Trending Topics
#12
Scooby Regular
Thread Starter
Join Date: Aug 2009
Location: jersey channel islands
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
KOEScoob
ScoobyNet General
6
17 September 2015 03:51 PM