Would i be right in thinking i need 440 injectors and a phase 2 map sensor if i wanted to get my 95wrx remapped to 1.4 - 1.5bar?

Obviously id need a daughter board etc before it can be mapped.

Anything else i would need?

Also, are all the map sensors off the ph2 cars the higher range eg uk and import?

thanks

 

To be honest majority of mappers will replace the MAP sensors when they remap for a small fee usually with a decent MAP sensor, i thinks its about 50 to 70 pound. A mate of mine runs 1.4 bar on a 95 WRX import and indeed it is a weapon with 340BHP JGM mapped with a SIMTEC and ALG and a TD05 i believe Simon (JGM) replaced his Map sensor with a 2 bar.

It may even be worth PM'ing JollyGreenMonster for more info.

 

Have done

It should be a right tool at 1220 kg caged with half a tank

 

I had the esl live ecu, with the later map sensor(£60+vat),440's, running 1.3 bar from Zen.

 

Price?

did you or zen source the map sensor and injectors?

power output?

 

i fitted the injectors, there easy to do, just make sure you apply vaseline to the seals to stop them tearing on fit. Seen them for £50-£100.

 

zen supplied and fitted the map sensor.