Notices

low oil pressure on start up

Thread Tools
 
Search this Thread
 
Old 23 May 2009, 02:12 AM
  #1  
carl.woolford
Scooby Regular
Thread Starter
 
carl.woolford's Avatar
 
Join Date: Jan 2009
Location: bridgend
Posts: 151
Likes: 0
Received 0 Likes on 0 Posts
Default low oil pressure on start up

having rebuilt my engine and now done 1000 miles running in, when i first start engine it seem to take a while, on a second or two too build up oil pressure and i can hear it knocking for that 1 second, any ideas on what could be causing this please
Old 23 May 2009, 09:26 AM
  #2  
dabow
Scooby Regular
iTrader: (19)
 
dabow's Avatar
 
Join Date: Nov 2005
Location: notts
Posts: 2,770
Likes: 0
Received 0 Likes on 0 Posts
Default

either its a very thin type oil, or your pump is on its way out

have you checked the oil level?
Old 23 May 2009, 09:38 AM
  #3  
ALi-B
Moderator
Support Scoobynet!
iTrader: (1)
 
ALi-B's Avatar
 
Join Date: Apr 2002
Location: The hell where youth and laughter go
Posts: 38,033
Received 301 Likes on 240 Posts
Default

Hmm. Shouldn't be knocking on start up, Could be draining down overnight. Needs checking out.

Loose oil pump screws/cover, dodgy pressere relief valve or the seal between the block and the oil pickup is sucking air.

Or there is a tolerance issue and its wiped out a bearing(s)

Last edited by ALi-B; 23 May 2009 at 09:40 AM.
Old 23 May 2009, 10:04 AM
  #4  
dabow
Scooby Regular
iTrader: (19)
 
dabow's Avatar
 
Join Date: Nov 2005
Location: notts
Posts: 2,770
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by ALi-B
Hmm. Shouldn't be knocking on start up, Could be draining down overnight. Needs checking out.

Loose oil pump screws/cover, dodgy pressere relief valve or the seal between the block and the oil pickup is sucking air.

Or there is a tolerance issue and its wiped out a bearing(s)
when my pump was starting to go. it was just low

then all of a sudden. there was smoke every where
the pump screws on the back came undone, letting the oil every where.

worth checking mate.
has the car had low presure all the time, or just resently. since i changed to an uprated one. never had a problem.
Old 23 May 2009, 10:16 AM
  #5  
ALi-B
Moderator
Support Scoobynet!
iTrader: (1)
 
ALi-B's Avatar
 
Join Date: Apr 2002
Location: The hell where youth and laughter go
Posts: 38,033
Received 301 Likes on 240 Posts
Default

If the screws have come done; they just need the threads fixed with thread-lock again (must be oil tolerant and temp stable).

No need to change the pump due to that unless the cover/gears have been scored damaged.

Last edited by ALi-B; 23 May 2009 at 10:23 AM.
Old 23 May 2009, 03:44 PM
  #6  
dabow
Scooby Regular
iTrader: (19)
 
dabow's Avatar
 
Join Date: Nov 2005
Location: notts
Posts: 2,770
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by ALi-B
If the screws have come done; they just need the threads fixed with thread-lock again (must be oil tolerant and temp stable).

No need to change the pump due to that unless the cover/gears have been scored damaged.
i could have, but desided on a new one.
due to the fact is was a little lower than my mates car

as soon as i changed to the new one, the presure was alot higher
and never had any issues since.

but i was just using this as an example.
this can/could have happened.

worth checking
Old 23 May 2009, 05:25 PM
  #7  
carl.woolford
Scooby Regular
Thread Starter
 
carl.woolford's Avatar
 
Join Date: Jan 2009
Location: bridgend
Posts: 151
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks for all the information done oil flush and changed from the mineral running in oil to normal oil, all seems to be ok now
Old 23 May 2009, 06:26 PM
  #8  
carl.woolford
Scooby Regular
Thread Starter
 
carl.woolford's Avatar
 
Join Date: Jan 2009
Location: bridgend
Posts: 151
Likes: 0
Received 0 Likes on 0 Posts
Default

think the noise still there only for a split second, if a bearing had gone it be there all the time, might just be me being paranoid. does anyone know of a good garage in south wales where i could have this checked plz
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SilverM3
ScoobyNet General
8
24 February 2021 01:03 PM
ALEXSTI
General Technical
5
28 September 2015 09:29 PM
Scooby_Lee101
General Technical
3
26 September 2015 12:04 AM
shorty87
Other Marques
0
25 September 2015 08:52 PM



Quick Reply: low oil pressure on start up



All times are GMT +1. The time now is 09:47 AM.