Can anyone tell me an easy way to remove the selector arm from the forks in the gearbox?

Thanks in advance

 

Just by the starter motor location you must find a 20mm dia cover screw with a hex socket in it and unscrew/remove it.
Find a 6mm threaded bolt, about 50mm long. Screw it into the end of the clutch arm pivot shaft exposed when you removed the above cover. Pull (hard maybe) on the bolt and the long shaft will pull through and the clutch arm will go loose.

 

Sorry maybe wrote the question wrong. Im trying to free the selector arm in the transfer box. I have the transfer box pulled back by about 2 inch but cant get the selector arm free from the forks.