Knocklink - Just relocated it!!!
Hi all,
Got a knocklink fitted for a good 8 months now.
Had it put near the a-pillar on the vent all this time which i think mostly its a waste of time as you cant really see it constantly. I guess I've missed out many flashes!!!!
Today I relocated it right next to the rev counter which i think it the best place to put it. This area is the mostly looked at while driving fast. I have stripped the box and drilled 5 holes on the inside of the dash so it just peep through nicely.
Here is the pic...
http://www.showoffyourcar.com//cars/SUBARU/10416.JPG
Some ppl place them here http://img.photobucket.com/albums/v1...inkDisplay.jpg
No offence but thats even worse than my a-pillar location!
One other thing, why didnt knocklink include a warning tone ie when it hits orange or higher. That would be nice.
Any1 done the same or simular as me or better location?
Mike
Got a knocklink fitted for a good 8 months now.
Had it put near the a-pillar on the vent all this time which i think mostly its a waste of time as you cant really see it constantly. I guess I've missed out many flashes!!!!
Today I relocated it right next to the rev counter which i think it the best place to put it. This area is the mostly looked at while driving fast. I have stripped the box and drilled 5 holes on the inside of the dash so it just peep through nicely.
Here is the pic...
http://www.showoffyourcar.com//cars/SUBARU/10416.JPG
Some ppl place them here http://img.photobucket.com/albums/v1...inkDisplay.jpg
No offence but thats even worse than my a-pillar location!
One other thing, why didnt knocklink include a warning tone ie when it hits orange or higher. That would be nice.
Any1 done the same or simular as me or better location?
Mike
Last edited by mikeswrx02; May 13, 2005 at 10:17 PM. Reason: picture uploaded
Neatest I've seen...

...quite good too...

...similar...

...with lambda link....

....shame it's not straight and scratched...
http://edbartlett6649.fotopic.net/p3743414.html
...quite good too...

...similar...

...with lambda link....
....shame it's not straight and scratched...
http://edbartlett6649.fotopic.net/p3743414.html
Originally Posted by corradoboy
Neatest I've seen...
http://www.aqyz05.dsl.pipex.com/knock.JPG
...quite good too...
http://img20.photobucket.com/albums/...by/klsmall.jpg
...similar...
http://img.photobucket.com/albums/v3...n/118_1851.jpg
...with lambda link....
http://images4.fotopic.net/?iid=yfsu...800&quality=70
....shame it's not straight and scratched...
http://edbartlett6649.fotopic.net/p3743414.html
http://www.aqyz05.dsl.pipex.com/knock.JPG
...quite good too...
http://img20.photobucket.com/albums/...by/klsmall.jpg
...similar...
http://img.photobucket.com/albums/v3...n/118_1851.jpg
...with lambda link....
http://images4.fotopic.net/?iid=yfsu...800&quality=70
....shame it's not straight and scratched...
http://edbartlett6649.fotopic.net/p3743414.html
My one is simular to the 3rd picture. My rev is on the right side so i put it above that side.
The 4th pic is not suitable cuz its too far away from sight. u wont notice anything even on red!!!Defo need a buzzer.
Originally Posted by jasonius
Are the LEDs as bright when viewed at 90deg..?
Trending Topics
Originally Posted by mikeswrx02
Thanks m8,
My one is simular to the 3rd picture. My rev is on the right side so i put it above that side.
The 4th pic is not suitable cuz its too far away from sight. u wont notice anything even on red!!!Defo need a buzzer.
My one is simular to the 3rd picture. My rev is on the right side so i put it above that side.
The 4th pic is not suitable cuz its too far away from sight. u wont notice anything even on red!!!Defo need a buzzer.

I'm either fitting in corner pod or (a bit more adveturous) inside the dash binnical, ie behind clear plastic, in front of gauges). May use some led omnidirectional covers so they can be seem easier from any angle.
http://www.maplin.co.uk/Module.aspx?...ldID=&doy=13m5
Only consern is will they be too bright at night and interfere with dash vision..?
Jason
Originally Posted by jasonius
I like this position and it seems the easiest to fit, however it'li be hidden by steering wheel for me..!
I'm either fitting in corner pod or (a bit more adveturous) inside the dash binnical, ie behind clear plastic, in front of gauges). May use some led omnidirectional covers so they can be seem easier from any angle.
http://www.maplin.co.uk/Module.aspx?...ldID=&doy=13m5
Only consern is will they be too bright at night and interfere with dash vision..?
Jason
I'm either fitting in corner pod or (a bit more adveturous) inside the dash binnical, ie behind clear plastic, in front of gauges). May use some led omnidirectional covers so they can be seem easier from any angle.
http://www.maplin.co.uk/Module.aspx?...ldID=&doy=13m5
Only consern is will they be too bright at night and interfere with dash vision..?
Jason

The brighter the better! gives u chance to react to it.
99% time of normal driving it wont come on anyways so a bright flash would be nice to wake u up!!!
Hi all
Just wondering when you dismantle the Knocklink do you have to run some wires from the original light positions to allow relocation in the dash etc..
Also, did you leave the innards hanging loose or encase it back in the original housing.
Sorry if these questions seem simple but hey I'm a simple kinda guy!
Cheers
Dave.
Just wondering when you dismantle the Knocklink do you have to run some wires from the original light positions to allow relocation in the dash etc..
Also, did you leave the innards hanging loose or encase it back in the original housing.
Sorry if these questions seem simple but hey I'm a simple kinda guy!
Cheers
Dave.
Originally Posted by Dave East
Hi all
Just wondering when you dismantle the Knocklink do you have to run some wires from the original light positions to allow relocation in the dash etc..
Also, did you leave the innards hanging loose or encase it back in the original housing.
Sorry if these questions seem simple but hey I'm a simple kinda guy!
Cheers
Dave.
Just wondering when you dismantle the Knocklink do you have to run some wires from the original light positions to allow relocation in the dash etc..
Also, did you leave the innards hanging loose or encase it back in the original housing.
Sorry if these questions seem simple but hey I'm a simple kinda guy!
Cheers
Dave.
http://www.showoffyourcar.com//cars/SUBARU/10416.JPG
I used hot glue gun and put lots around the bulb area to secure it.
Wish i'd taken some pics of my process!
Hope this helps anyways.
mike
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
Jan 11, 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
55
Aug 5, 2018 07:02 AM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
Dec 14, 2015 08:16 AM
blockhead
Subaru Parts
19
Nov 7, 2015 11:50 PM







