Swapping Seats 2005 WRX Blob Eye - ScoobyNet.com - Subaru Enthusiast Forum



Swapping Seats 2005 WRX Blob Eye

Reply
 
 
 
Thread Tools Search this Thread
Old 12 August 2018, 07:54 PM   #1  
metafora
Scooby Newbie
Thread Starter
 
metafora's Avatar
 
Join Date: Feb 2018
Location: South London
Posts: 16
Default Swapping Seats 2005 WRX Blob Eye

I recently procured a full set of leather seats for my 2005 WRX Blob Eye. They were suppose to just swap straight in without issues according to the seller.
However now I've come to do the job it turns out the driver side seat fixings are not the same and the seat won't line up with the bolt holes.
After some head scratching I realised I would have to swap the seat base frames over since I can't see any obvious way to adjust the fitting positions on the leather drivers side seat, (I may be missing something).

Anyhow I managed to remove most of the frame but came across a bolt that seems to be a Torx Star allen key type..I don't have any of these allen keys and will have to buy some.

Does anyone know the size I would need? I know they come in sets but I don't want to invest in a set and it doesn't have the correct size.

Link to pictures below, including the bolt in question.

https://imgur.com/a/Ieriv9J

The passenger side seat seems to go in without issue and looks quite swish.



metafora is offline   Reply With Quote
Old 12 August 2018, 10:18 PM   #2  
TECHNOPUG
Scooby Regular
iTrader: (1)
 
Join Date: Nov 2014
Location: Tetbury
Posts: 1,310
Default

They are SL seats from a Hawkeye, no?
TECHNOPUG is offline   Reply With Quote
Old 12 August 2018, 10:44 PM   #3  
metafora
Scooby Newbie
Thread Starter
 
metafora's Avatar
 
Join Date: Feb 2018
Location: South London
Posts: 16
Default

They are from an SL, maybe the Hawkeye, I'm no expert on the difference, looks like if I switch the base frame on the drivers side they should be good to go in most respects, aside from the front right screw hole positioning . Just stuck on what I need to get that Torx bolt off. Same bolt on both seats.

On closer inspection one of the other regular bolts on the frame of the leather drivers seat actually has its head sheared off. Which means the seat doesn't sit on the frame properly so another reason to change the frame. I missed that issue when I bought the seats and wonder if the buyer was aware. It's something you can only notice when you come to fit the seats. The thread of the bolt is still in the frame, unless that can be drilled out or removed in some way the frame is useless.

Last edited by metafora; 12 August 2018 at 11:00 PM.
metafora is offline   Reply With Quote
Old 13 August 2018, 09:14 AM   #4  
metafora
Scooby Newbie
Thread Starter
 
metafora's Avatar
 
Join Date: Feb 2018
Location: South London
Posts: 16
Default

Any takers on the Torx size of the bolt in the picture?
metafora is offline   Reply With Quote
Old 13 August 2018, 10:55 AM   #5  
TECHNOPUG
Scooby Regular
iTrader: (1)
 
Join Date: Nov 2014
Location: Tetbury
Posts: 1,310
Default

It'll be a 45 or 50.
TECHNOPUG is offline   Reply With Quote
Old 14 August 2018, 09:17 AM   #6  
boggissimo
Scooby Regular
 
boggissimo's Avatar
 
Join Date: Aug 2014
Location: Kent
Posts: 362
Default

Quote:
Originally Posted by metafora View Post
I recently procured a full set of leather seats for my 2005 WRX Blob Eye. They were suppose to just swap straight in without issues according to the seller.
However now I've come to do the job it turns out the driver side seat fixings are not the same and the seat won't line up with the bolt holes.
I put SL seats in my blob WRX without any trouble, the bolt holes matched up fine. Maybe there's a difference between blob and hawk?
boggissimo is offline   Reply With Quote
Old Yesterday, 10:07 PM   #7  
metafora
Scooby Newbie
Thread Starter
 
metafora's Avatar
 
Join Date: Feb 2018
Location: South London
Posts: 16
Default

Quote:
Originally Posted by TECHNOPUG View Post
It'll be a 45 or 50.
Thanks, I got a set from Amazon for 6 it turned out to be a 45, did the job, bolt came out nice and easy.

Now I've just got to get the frame off the cloth seat and hope it fixes onto the leather seat without issues.


metafora is offline   Reply With Quote
Old Yesterday, 10:17 PM   #8  
metafora
Scooby Newbie
Thread Starter
 
metafora's Avatar
 
Join Date: Feb 2018
Location: South London
Posts: 16
Default

Quote:
Originally Posted by boggissimo View Post
I put SL seats in my blob WRX without any trouble, the bolt holes matched up fine. Maybe there's a difference between blob and hawk?
If you look at the 4th and 5th pictures you can see how the fixing point for the front right is about an inch or so further to the front on the leather seat compared to the cloth seat and its not adjustable.

I've got the bottom frame of the leather seat off now and hopefully the frame from the cloth seat will come off as easily and will go on to the leather seat to allow me to bolt the seat in to the car.

Also strange how the front fixing points on both sets of seats passenger and drivers side are flaking paint and corroded slightly, but the rear fixing points on both sets are good as new.
metafora is offline   Reply With Quote
Old Yesterday, 10:27 PM   #9  
metafora
Scooby Newbie
Thread Starter
 
metafora's Avatar
 
Join Date: Feb 2018
Location: South London
Posts: 16
Default

Quote:
Originally Posted by TECHNOPUG View Post
They are SL seats from a Hawkeye, no?

Actually, I took a look back through my eBay purchase history, they were advertised as Hawkeye WRX STi Leather seats.

I got the full set, fronts and rear with door cards and the heated seat switches for 200 from a fellow in Glasgow.

My cloth seats are in excellent condition, I figure I'll claw back something from selling them on. Only issue I have now is the drivers seat won't have a frame but it'll be good for someone who wants to switch their existing cloth seat for a better one and dispose of their old one, that way they can reuse their existing frame.
metafora is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Classic front strut brace and Blob Eye WRX front seats fit classic & bug eye WRX johnwiz Subaru Parts 6 14 July 2013 08:50 AM
Classic front strut brace and Blob Eye WRX front seats fit classic & bug eye WRX johnwiz Subaru Parts 23 03 July 2013 04:26 PM
Blue sti blob eye & silver blob eye CWScoob? Was it you? 4 20 July 2012 10:49 PM
Swapping from classic to blob eye. Any advice? timtheninja ScoobyNet General 17 30 January 2009 12:22 AM
The classic/bug eye/blob eye or Hawk eye ? The Rig ScoobyNet General 10 09 February 2007 09:46 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT +1. The time now is 06:01 PM.


© 2018 MH Sub I, LLC dba Internet Brands
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.