Prodrive ECU
Trending Topics
16 July 2018, 04:31 PM
#9
Scooby Regular
Thread Starter
Join Date: Jul 2017
Location: Stroud
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
18 July 2018, 11:15 AM
#11
Scooby Regular
Thread Starter
Join Date: Jul 2017
Location: Stroud
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Yes a Prodrive chip! when you have a car with a Prodrive pack the ecu has a prodrive chip to raise the standard horse power to around 250bhp.As mentioned above I had to keep the case and that's why I'm open to offers
01 September 2018, 09:56 AM
#15
Scooby Regular
Thread Starter
Join Date: Jul 2017
Location: Stroud
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Hi Jaygsi,
Found this on an old scoobynet thread so its not a re-map it is a chip.
"I know the early ECU's had a chip mounted in a removeable socket. If it wasn't a Prodrive then the Chip wasn't fitted."
"Be aware that I am referring to a Pre'97 ECU" "I'm not sure of the changes other than the Connectors and Pin-Out. However, if you have a Blank IC socket i.e a missing chip then it is probably similar to the early versions"No Chip = No Prodrive.
Found this on an old scoobynet thread so its not a re-map it is a chip.
"I know the early ECU's had a chip mounted in a removeable socket. If it wasn't a Prodrive then the Chip wasn't fitted."
"Be aware that I am referring to a Pre'97 ECU" "I'm not sure of the changes other than the Connectors and Pin-Out. However, if you have a Blank IC socket i.e a missing chip then it is probably similar to the early versions"No Chip = No Prodrive.
02 September 2018, 11:24 PM
#16
Interesting, i will pop open my standard ecu and have a look.
Hi Jaygsi,
Found this on an old scoobynet thread so its not a re-map it is a chip.
"I know the early ECU's had a chip mounted in a removeable socket. If it wasn't a Prodrive then the Chip wasn't fitted."
"Be aware that I am referring to a Pre'97 ECU" "I'm not sure of the changes other than the Connectors and Pin-Out. However, if you have a Blank IC socket i.e a missing chip then it is probably similar to the early versions"No Chip = No Prodrive.
Found this on an old scoobynet thread so its not a re-map it is a chip.
"I know the early ECU's had a chip mounted in a removeable socket. If it wasn't a Prodrive then the Chip wasn't fitted."
"Be aware that I am referring to a Pre'97 ECU" "I'm not sure of the changes other than the Connectors and Pin-Out. However, if you have a Blank IC socket i.e a missing chip then it is probably similar to the early versions"No Chip = No Prodrive.
Thread
Thread Starter
Forum
Replies
Last Post
Sammyb1
Engine Management and ECU Remapping
4
02 March 2015 09:51 PM
wanted
General Technical
22
30 June 2003 11:36 PM
wanted
Lighting and Other Electrical
2
28 June 2003 12:40 AM