Mapper in the midlands
16 October 2017, 01:53 PM
#1
Scooby Regular
Thread Starter
Join Date: Dec 2008
Location: telford
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Mapper in the midlands
Hi all I’m in desperate need of a mapper in the midlands who can map my car as I’ve removed all the cats upgraded the turbo and injectors and now can’t drive it until done, I’ve tried Andrew Carr and he’s not getting back to me after it was due to be done Thursday last week. Where is the next best place to go I’m based in Telford but don’t mind a bit of a drive if necessary
16 October 2017, 03:52 PM
#5
Scooby Regular
Thread Starter
Join Date: Dec 2008
Location: telford
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
it was booked with matty but the mapper let him down, cant get hold of poleposition on there office number currently speaking to chevron motorsport who are even closer as bob rawle maps there just waiting on a call back
17 October 2017, 11:30 PM
#6
Who does Matty use? Pole position are rubbish sometimes.
Originally Posted by madmattwrx
it was booked with matty but the mapper let him down, cant get hold of poleposition on there office number currently speaking to chevron motorsport who are even closer as bob rawle maps there just waiting on a call back
Trending Topics
18 October 2017, 12:28 PM
#9
Scooby Regular
Thread Starter
Join Date: Dec 2008
Location: telford
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Booked in at pole position for Thursday next week now for the dual map with anti lag and launch control
As chevron can’t get bob there for about a month
As chevron can’t get bob there for about a month
25 October 2017, 08:26 PM
#19
Scooby Regular
Thread Starter
Join Date: Dec 2008
Location: telford
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
26 October 2017, 12:08 AM
#20
Scooby Regular
iTrader: (2)
Join Date: Jun 2016
Location: Shrewsbury
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
It was a 220bhp wagon with a td04. It now has a td05 with yellow injectors, newage coilpack mod, 3 bar map sensor, 255lph walbro fuel pump and esl. Im hoping to get a safe figure near 320. My concern is my gearbox, will it cope. Never mind, we will see what happens when it happens. I was thinking about getting rid of the short ratio anyway and swapping to a newer uk 5 speed.
26 October 2017, 05:58 PM
#21
Scooby Regular
iTrader: (2)
Join Date: Jun 2016
Location: Shrewsbury
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Its weird seeing someone else drive your car around. Thats my silver wagon in the background being driven back to the shop. They had finished your car and pulled it out ready to be mapped by the time mine was finished.
It was smoking a fair bit when they pulled it out, is it alright? Hope nothings wrong with it. Its had a fair bit done to it, i could see the suspensions been done and the front mount looks nice. Did you get what you were hoping for?
I had a low boost map that is about 230ish that was amazing for the motorway back home! Really happy with that. And a power map that runs 1.2bar at about 310 i think he said, its insane! Really really happy with it! The back roads to my house were so fun to drive!
Alan wasnt a bad chap, not really talkative, but just got on with the job. He took the car out on his own which i wasnt expecting, i thought he would live map as i was driving and i could pick up some info as to what he was doing for my own curiousity but it was fine i guess. End result im happy.
26 October 2017, 07:28 PM
#22
Scooby Regular
Thread Starter
Join Date: Dec 2008
Location: telford
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Injectors I bought were knackered so they were just pumping fuel in hence the smoke.... they swapped them for some genuine pinks and all was good running 1.35bar on high boost with pops and bangs and 1.2bar on standard map along with anti lag and launch control 
Happy now but took a while drive back was good
Happy now but took a while drive back was good