What Voltages should I see on my TPS
#6
Scooby Regular
Join Date: Nov 2000
Location: 32 cylinders and many cats
Posts: 18,658
Likes: 0
Received 1 Like
on
1 Post
I pick it up at the ECU as an input for my boost controller, referenced to vehicle ground. Don't know about the actual connector. Try the link manual and some of the ravensblade wiring diagrams floating about, although it could be different on your model year.
Trending Topics
#8
TPS (on MY97 at least) should give 4.2 - 4.5V with throttle fully opened.
That would make it 4.35V +/- 0.20V then.
Oh, and in case you are interested, if you adjust the TPS mounting, the tightening torque you want is 2.2 +/- 0.2N.m (1.6 +/- 0.1 ft-lb)
Moray
bbs.22b.com
[Edited by MorayMackenzie - 3/7/2002 1:53:02 PM]
That would make it 4.35V +/- 0.20V then.
Oh, and in case you are interested, if you adjust the TPS mounting, the tightening torque you want is 2.2 +/- 0.2N.m (1.6 +/- 0.1 ft-lb)
Moray
bbs.22b.com
[Edited by MorayMackenzie - 3/7/2002 1:53:02 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
soupy6667
Lighting and Other Electrical
0
21 September 2015 06:19 AM