uprated actuators
Scooby Regular
Joined: Jan 2002
Posts: 500
Likes: 0
Sy,
what do you want to achieve?
If you want more boost at high revs (above 5000RPM) it could help. With the standard actuator in standard setting you can achieve 14.5 PSI at 6.000 RPM. (with proper mapping) However the TD04 is FAR from efficient at that boost at high revs, I donīt think itīs a good thing to go any higher in boost!
Below 5.000 RPM you can making more than 20 PSI with the standard actuator. (try at own risk!)
Mark.
what do you want to achieve?
If you want more boost at high revs (above 5000RPM) it could help. With the standard actuator in standard setting you can achieve 14.5 PSI at 6.000 RPM. (with proper mapping) However the TD04 is FAR from efficient at that boost at high revs, I donīt think itīs a good thing to go any higher in boost!
Below 5.000 RPM you can making more than 20 PSI with the standard actuator. (try at own risk!)
Mark.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
hedgecutter
General Technical
3
Sep 25, 2015 02:35 PM