Buffing/polishing new paint
#1
Scooby Regular
Thread Starter
iTrader: (46)
Join Date: Nov 2005
Location: Probably polishing it.Lol
Posts: 5,381
Likes: 0
Received 0 Likes
on
0 Posts
Buffing/polishing new paint
Today I had a poor paint job done on my RB5. The rear bumper was resprayed by Chipsaway and the end result is flat and has little shine and hardly any reflection.
Is it possible for this to be polished up to a good shine?
Is it possible for this to be polished up to a good shine?
#4
Former Sponsor
iTrader: (3)
Join Date: Feb 2006
Location: AB51 0TH
Posts: 2,562
Likes: 0
Received 0 Likes
on
0 Posts
Chances are high that a machine polish with fragile abrasives like those in the Menzerna USA range (Intensive Polish and Final Polish II) will be able to cut it back without inducing heavy micormarring. From the sounds of it (and the way that Chips Away lads usually work) the paint was not cured, and will be super soft, so don't be tempted to try anything harsh on it, otherwise you will marr it to hell... which is maybe the cause of the problem anyway - did the Chips Away guy machine it at all once it was dry? Or use any heat of IR lamps to bake it?
#5
Scooby Regular
iTrader: (2)
leave it for a good while to let it harden up then give it a good buff
seen my mates bumper get repaired perfect colour match but like yours a ****
finish but what i notced it only lost a good shine on the repair parts which had been in primer me thinking that it was not cured before the base coat and laquer was sprayed on so it looks like it sinkage if that makes sense
anyway he has got the shine now after the man came and rectified and buffed it
maybe you could ask him to fix it as you have already paid him to do the job?
good luck any how
danny
seen my mates bumper get repaired perfect colour match but like yours a ****
finish but what i notced it only lost a good shine on the repair parts which had been in primer me thinking that it was not cured before the base coat and laquer was sprayed on so it looks like it sinkage if that makes sense
anyway he has got the shine now after the man came and rectified and buffed it
maybe you could ask him to fix it as you have already paid him to do the job?
good luck any how
danny
#6
Scooby Regular
Thread Starter
iTrader: (46)
Join Date: Nov 2005
Location: Probably polishing it.Lol
Posts: 5,381
Likes: 0
Received 0 Likes
on
0 Posts
Polished Bliss
Yes he did use heat lamps after the spraying stages. I just can't work out why one section is alot shinier than the other.
He did have a machine polisher on it at one stage but I was inside at that time [for about 3mins] I wouldn't have thought that the paint was hard enough to laquer anyway within 10 mins of spraying?
If/when he comes back I will be blocking his van so he won't be able to drive away until i'm happy.
He did have a machine polisher on it at one stage but I was inside at that time [for about 3mins] I wouldn't have thought that the paint was hard enough to laquer anyway within 10 mins of spraying?
If/when he comes back I will be blocking his van so he won't be able to drive away until i'm happy.
#7
Former Sponsor
iTrader: (3)
Join Date: Feb 2006
Location: AB51 0TH
Posts: 2,562
Likes: 0
Received 0 Likes
on
0 Posts
You can flash cure paint in around 10-12 minutes with heat lamps if you use a chemical accelerant (or so my paint shop tells me), so seems reasonable to me. What doesn't is the uneveness of the resulting finish/shine - no excuse for that if the paint was applied properly, so my guess is the guy simply did not take enough time to finish the job properly when polishing out.
Trending Topics
#8
Scooby Regular
Join Date: Jan 2005
Location: In my oven painting yet another new car
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
it seems to me that he,s used a 1 pack laquer on the bumper and has,nt faded out the laquer edge very well the trouble with these laquers is that they dont hold there shine very well there cheap to buy and a lot of car dealers use these paints for a quick fix on used cars like most things in life you get what you pay for it does make me laugh when i see these,s smart repairs painting cars in the street.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
shorty87
Wheels And Tyres For Sale
0
25 September 2015 08:36 PM