2.1 Stroker built by Engine Tuner, 6 Speed, S206B, and much more
#1
This will all be removed from a complete running classic MY00 STI once a genuine buyer has seen, heard, and felt the engine running. The car can be seen at TOTB, and all parts will be available after the event
Available.
EBC drilled and grooveddisc brakes (rear)
£380 Titanium center section and back box (4kg) and exhaust bungs x2
Loads more..................
Works Emotion 17" alloys, possibly with tyres too
Aeromotive fpr
Impreza sports bonnet
Boot lid with Small boot lip spoiler from a e46 m3
Carbon sti strut brace
255 fuel pump
Clear side repeaters
Clear indicators
Alpine stereo and speakers
Magancore ht leads
knocklink set up
Deposit taken.
£100 Ex Fuds Cobra Bucket Seats - SeanNewton93 (no deposit/payment as yet)
Full payment taken.
£3,000 2.1 Stroker, by Engine Tuner. Wiseco forged pistons, K1 H beam forged long rods, 2.5 Crank, Cosworth bearings, RCM oil pump, water pump, ARP head stud, Cosworth baffle sump, and Cosworth gaskets. Fully balanced, assembly, Heads fully rebuilt, 8.4 to 1 comp ratio. yallahyimshi paid in full
£1,900 6 speed gearbox refreshed by Zen under 4'000 miles ago (Baulk rings replaced, reverse shifter fork replaced), center shaft, reardiff and drive shafts, hubs etc for a complete set up. yallahyimshi Paid in full
£400 Defi gauges. boost, oil temp, oil pressure gauges inc the dash top pod. Deficommander. yallahyimshi Paid in full
£300 Hybrid front mount intercooler (HarveySmith) with Custom intercooler pipe and VTA SOLD, will be arrnaging post Monday.
Collected/Posted.
Apex inverted coilovers with pillow balltop mounts Ganz1983 paid
Big GGR (Same as RCM) K&N Flter Ganz1983 paid
Zen Performance 740cc injectors. Ganz1983 Paid
£1,100 Turbo Technics S206b Billet turbo & Wastegate with Hayward & Scott 3 inch Custom down pipe, only 4'000 miles!Ganz1983 paid
Carbon bonnet struts !Ganz1983 paid
£45. Door cards will be -Posted
£130 25 Row Mocal oil cooler. beliblisk Posted
£700 6 speed Exedy twinplate clutch and flywheel – only 700 miles (sold ebay)
£350 Apexi power fc ecu with fc commander S744hdv pAID posted 28/08/13
£130 rear lights MarkC posted 28/08/13
£300 GT Spec 2 stainless headers, pro DEI heat wrapped and tied inc up pipe STOOBOY payment taken Going by City link Monday 02-09-13
£300 Godspeed 335mm big brake kit (front) Furiokid payment taken Going by City link Monday 02-09-13
£200 Apexi avcr boost controller S744hdv payment taken Going by Hermes Monday 02-09-13
£70 - Knock link Going by Hermes Monday 02-09-13
£n/a - Temp sensor (Ian) Going by Hermes Monday 02-09-13
Probably more I've forgot, please ask
Cheers
Rob
r-s-r-signs@gmx.co.uk
Available.
EBC drilled and grooveddisc brakes (rear)
£380 Titanium center section and back box (4kg) and exhaust bungs x2
Loads more..................
Works Emotion 17" alloys, possibly with tyres too
Aeromotive fpr
Impreza sports bonnet
Boot lid with Small boot lip spoiler from a e46 m3
Carbon sti strut brace
255 fuel pump
Clear side repeaters
Clear indicators
Alpine stereo and speakers
Magancore ht leads
knocklink set up
Deposit taken.
£100 Ex Fuds Cobra Bucket Seats - SeanNewton93 (no deposit/payment as yet)
Full payment taken.
£3,000 2.1 Stroker, by Engine Tuner. Wiseco forged pistons, K1 H beam forged long rods, 2.5 Crank, Cosworth bearings, RCM oil pump, water pump, ARP head stud, Cosworth baffle sump, and Cosworth gaskets. Fully balanced, assembly, Heads fully rebuilt, 8.4 to 1 comp ratio. yallahyimshi paid in full
£1,900 6 speed gearbox refreshed by Zen under 4'000 miles ago (Baulk rings replaced, reverse shifter fork replaced), center shaft, reardiff and drive shafts, hubs etc for a complete set up. yallahyimshi Paid in full
£400 Defi gauges. boost, oil temp, oil pressure gauges inc the dash top pod. Deficommander. yallahyimshi Paid in full
£300 Hybrid front mount intercooler (HarveySmith) with Custom intercooler pipe and VTA SOLD, will be arrnaging post Monday.
Collected/Posted.
Apex inverted coilovers with pillow balltop mounts Ganz1983 paid
Big GGR (Same as RCM) K&N Flter Ganz1983 paid
Zen Performance 740cc injectors. Ganz1983 Paid
£1,100 Turbo Technics S206b Billet turbo & Wastegate with Hayward & Scott 3 inch Custom down pipe, only 4'000 miles!Ganz1983 paid
Carbon bonnet struts !Ganz1983 paid
£45. Door cards will be -Posted
£130 25 Row Mocal oil cooler. beliblisk Posted
£700 6 speed Exedy twinplate clutch and flywheel – only 700 miles (sold ebay)
£350 Apexi power fc ecu with fc commander S744hdv pAID posted 28/08/13
£130 rear lights MarkC posted 28/08/13
£300 GT Spec 2 stainless headers, pro DEI heat wrapped and tied inc up pipe STOOBOY payment taken Going by City link Monday 02-09-13
£300 Godspeed 335mm big brake kit (front) Furiokid payment taken Going by City link Monday 02-09-13
£200 Apexi avcr boost controller S744hdv payment taken Going by Hermes Monday 02-09-13
£70 - Knock link Going by Hermes Monday 02-09-13
£n/a - Temp sensor (Ian) Going by Hermes Monday 02-09-13
Probably more I've forgot, please ask
Cheers
Rob
r-s-r-signs@gmx.co.uk
Last edited by Rob Day; 01 September 2013 at 04:43 PM.
#7
Hi mate, I'll be interested in a few things from that list. Knock link, fmic & headers & up-pipe. Would the latter mate up to a standard uk turbo engine & turbo?
Also a pic of the car may help so I can judge what other bits I may want!
Cheers
Also a pic of the car may help so I can judge what other bits I may want!
Cheers
Trending Topics
#11
Yes true 3 “, I’ll get some pics this afternoon all being well.
The headers are mint, and are wrapped very well and are wire tied every inch or so.
Thanks everyone
Rob
#16
No worries, nothing is going until I have sold the engine and box, to which I have several people interested in.
I'll get pics today of most parts, I ran out of time yesterday to get anything done for myself Im not interesting in splitting the full kit sorry, thats unless someone else can negotiate with you to take the rest,
Its an Alpine Single Din, I might have an original double Din Subaru one in the garage though?
As above, i'll do it today
I'll get pics today of most parts, I ran out of time yesterday to get anything done for myself Im not interesting in splitting the full kit sorry, thats unless someone else can negotiate with you to take the rest,
Its an Alpine Single Din, I might have an original double Din Subaru one in the garage though?
As above, i'll do it today
#17
Scooby Regular
iTrader: (2)
Join Date: Jan 2012
Location: Staffordshire
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
No worries, nothing is going until I have sold the engine and box, to which I have several people interested in.
I'll get pics today of most parts, I ran out of time yesterday to get anything done for myself Im not interesting in splitting the full kit sorry, thats unless someone else can negotiate with you to take the rest,
Its an Alpine Single Din, I might have an original double Din Subaru one in the garage though?
As above, i'll do it today
I'll get pics today of most parts, I ran out of time yesterday to get anything done for myself Im not interesting in splitting the full kit sorry, thats unless someone else can negotiate with you to take the rest,
Its an Alpine Single Din, I might have an original double Din Subaru one in the garage though?
As above, i'll do it today
#18
Pictures as requested.
Defi
Video of defi's
Titanium 3" exhaust.
Avcr boost controller.
S206 billet
Headers "wrapped", difficult to see I know, but until there off its the best I can do.
Apexi controller, Ecu is there too, just little time
Induction.
Defi
Video of defi's
Titanium 3" exhaust.
Avcr boost controller.
S206 billet
Headers "wrapped", difficult to see I know, but until there off its the best I can do.
Apexi controller, Ecu is there too, just little time
Induction.
Last edited by Rob Day; 16 July 2013 at 10:11 PM.
#23
Just for info the Billet S206 is £1200 new, plus £200 for the downpipe, plus Vat =£1680 new,
I've just reduced this one to £1100 which inc the downpipe, which I think is a Bargain!
More info taken from the man that should know!
Rob
Last edited by Rob Day; 17 July 2013 at 08:26 PM.