Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

NPS on a 2003 STi

Thread Tools
 
Search this Thread
 
Old Jun 30, 2011 | 10:20 PM
  #1  
scotty44's Avatar
scotty44
Thread Starter
Scooby Regular
iTrader: (12)
 
Joined: Mar 2005
Posts: 829
Likes: 0
From: Stoke
Default NPS on a 2003 STi

Anyone know where about this is on the box, also is it pig to fit
Pictures would be cool
Reply
Old Jun 30, 2011 | 10:40 PM
  #2  
bigarf's Avatar
bigarf
Scooby Regular
iTrader: (67)
 
Joined: Oct 2007
Posts: 4,061
Likes: 0
From: w,yorkshire
Default

there are 2 switches on the top of the box,the nps is the furthest one back.its about directly ontop in the centre of the box,normally has a black plug on it,so if you follow the wires up from the plug you will find it.just swapped mine over.took me 45 mins altogether.
Reply
Old Jun 30, 2011 | 10:49 PM
  #3  
scotty44's Avatar
scotty44
Thread Starter
Scooby Regular
iTrader: (12)
 
Joined: Mar 2005
Posts: 829
Likes: 0
From: Stoke
Default

Nice one matey, can you do it from under the car IE jacked up ?
Does anything need removing to get to it ?
Reply
Old Jul 7, 2011 | 06:57 AM
  #4  
bigarf's Avatar
bigarf
Scooby Regular
iTrader: (67)
 
Joined: Oct 2007
Posts: 4,061
Likes: 0
From: w,yorkshire
Default

Originally Posted by scotty44
Nice one matey, can you do it from under the car IE jacked up ?
Does anything need removing to get to it ?
i have a pit so its a bit easier to get under the car.undo the top engine mount (pitch mount)so that the engine will tilt backwards,drop the prop center bearing,take the exhaust of its rubbers.undo the 2 bolts from under the gear selector then support the under neath of the box and undo the mountings.lower the box enough to get your hand over the top of it so you can undo the nps.19mm spanner if i remmember right.once its out and the new ones in just do everything back up and jobs a good en.
Reply
Old Jul 11, 2011 | 11:35 PM
  #5  
scotty44's Avatar
scotty44
Thread Starter
Scooby Regular
iTrader: (12)
 
Joined: Mar 2005
Posts: 829
Likes: 0
From: Stoke
Default

Originally Posted by bigarf
i have a pit so its a bit easier to get under the car.undo the top engine mount (pitch mount)so that the engine will tilt backwards,drop the prop center bearing,take the exhaust of its rubbers.undo the 2 bolts from under the gear selector then support the under neath of the box and undo the mountings.lower the box enough to get your hand over the top of it so you can undo the nps.19mm spanner if i remmember right.once its out and the new ones in just do everything back up and jobs a good en.
Cheers buddy, I think I'll give myself a day on this then
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
Jan 11, 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
Dec 14, 2015 08:16 AM
Stidara
Subaru
5
Sep 23, 2015 10:30 PM
Rutt_Dj
General Technical
2
Sep 8, 2015 09:49 PM




All times are GMT +1. The time now is 10:57 AM.