They gone...!!
Thread Starter
Scooby Regular
Joined: Feb 2002
Posts: 2,485
Likes: 2
From: Hunting down door dinger's in south wales..
They gone...!!
Well after much thought..[img]/confused-smiley-17417.gif[/img] i have changed my lexus style light for the earler ones of a 06 model.. just could not get used the the one large fog light in only one light.. and was not fussed on the chrome inserts on a white car..
Before..
After..
Before..
After..
Thread Starter
Scooby Regular
Joined: Feb 2002
Posts: 2,485
Likes: 2
From: Hunting down door dinger's in south wales..
Cheers guys, some will like some will not thats how it goes...[img]/happy-smiley-541.gif[/img] my garage is always clean and tidy must be my OCD the mrs says i keep it cleaner than the house...[img]/happy-smiley-566.gif[/img]
I also changed the bulb set up to the JDM way, look good to..!
I also changed the bulb set up to the JDM way, look good to..!
Trending Topics
Lee, I did exactly the same to my Hawkeye as I think the rear lights do look slightly chav. The Blobeye lights look far better and the red segments suit the look far better than the clear segments on the Hawkeye lamps. 
Even better to get the JDM ones as the circular light is the night light with square as the brake light 
TX.
Edit - doh, you've done that already!
TX.
Edit - doh, you've done that already!
Last edited by Terminator X; Mar 17, 2011 at 08:33 PM.
Thread Starter
Scooby Regular
Joined: Feb 2002
Posts: 2,485
Likes: 2
From: Hunting down door dinger's in south wales..
could not agree more...
Thread Starter
Scooby Regular
Joined: Feb 2002
Posts: 2,485
Likes: 2
From: Hunting down door dinger's in south wales..
Scooby Regular
Joined: Mar 2011
Posts: 126
Likes: 0
From: Surrey
http://www.revolution247.com/ or on their sub site just-subaru (from menu), they work very well & amber comes through when active & looks a lot better in the flesh think photo shot too close as from distance just looks like silver strip
Thread Starter
Scooby Regular
Joined: Feb 2002
Posts: 2,485
Likes: 2
From: Hunting down door dinger's in south wales..
middle lights are the break lights (insted of the side lights)
on the uk cars the outside on the left light is a blank/reflector
and the outside on the right light is the fog light
on JDM models the have side lights on both outside positions....
Thread Starter
Scooby Regular
Joined: Feb 2002
Posts: 2,485
Likes: 2
From: Hunting down door dinger's in south wales..
http://www.revolution247.com/ or on their sub site just-subaru (from menu), they work very well & amber comes through when active & looks a lot better in the flesh think photo shot too close as from distance just looks like silver strip
Thread Starter
Scooby Regular
Joined: Feb 2002
Posts: 2,485
Likes: 2
From: Hunting down door dinger's in south wales..
Thread Starter
Scooby Regular
Joined: Feb 2002
Posts: 2,485
Likes: 2
From: Hunting down door dinger's in south wales..
yea your right.. got to keep it clean though will probably be my home when me and her indoors have a row..[img]/grinning-smiley-9517.gif[/img]
Inner circles are now the side lights (instead of the break light)
middle lights are the break lights (insted of the side lights)
on the uk cars the outside on the left light is a blank/reflector
and the outside on the right light is the fog light
on JDM models the have side lights on both outside positions....
middle lights are the break lights (insted of the side lights)
on the uk cars the outside on the left light is a blank/reflector
and the outside on the right light is the fog light
on JDM models the have side lights on both outside positions....
Both had different holes blanked, so I got a "Circle" cutter thing and opened up the lenses on all of them, I now have the inner circles as brakes, and middle and outer as rear lights. Took some swapping of bulb holders too as the JDM ones and UK were slightly different.
As mine is a JDM I have the usual foglight cut into the bumper.
I've got the silvertec bulbs, got mine from Demon Tweekes but Autobulbs direct is a really good source of bulbs too
Thread Starter
Scooby Regular
Joined: Feb 2002
Posts: 2,485
Likes: 2
From: Hunting down door dinger's in south wales..
My god looks like you had a bit if a nightmare with the lights then, never mind as long as they are done now..[img]/grinning-smiley-17116.gif[/img] know what you mean i had a bit of trouble swapping the bulb holders as well, i sware they are all slightley different and the wires only just reached as well my thumbs are killing me...
when you drilled the blank space did you have to get new bulb holders then...?
when you drilled the blank space did you have to get new bulb holders then...?
It was a bugger but not that bad, I used a "Conical" stepped type hole drill, and going carefully I made the hole so it was a tightish fit on the type of holder I had to use. I also had to trim down the bits that you twist to lock the holder in, so that the bulb went far enough into the back of the lens, a snug fit and thay havn't budged at all.
I'm toying with the idea of having the circles as sides now and move the brake into either the middle or the outer bit.
If you do drill them out at any point, get someone to hoover the bits as you go, as they can escape back into the lense area ! I know I had to hoover mine out !! get 'em before they drop in LOL.
P.S. I had a spare rear light loom and pinched holders off that.
I'm toying with the idea of having the circles as sides now and move the brake into either the middle or the outer bit.
If you do drill them out at any point, get someone to hoover the bits as you go, as they can escape back into the lense area ! I know I had to hoover mine out !! get 'em before they drop in LOL.
P.S. I had a spare rear light loom and pinched holders off that.
Last edited by Rally fan 555; Mar 18, 2011 at 12:09 AM.
Thread Starter
Scooby Regular
Joined: Feb 2002
Posts: 2,485
Likes: 2
From: Hunting down door dinger's in south wales..
My buddy nathan tiley built mine his company is call ACL builders, contact number for him is 07960 916343 if you want a quote, I can recomend him tell him you had his number off me...