R8 peeps new here
i picked up my subaru sti tonight and before i picked her up i bought this kit http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWNX:IT]

now iv fitted HID's befor to my astra VXR but where im stuck there are two spade connectors where do these go? any pics or a walk through would be much appriciated..

also to take headlights out how many screws are there and where are they located

many thanks in advance Rich

 

For the headlights.Take the grill out,and underneath the lights on the inner side of the lights is a white plastic arm.Undo the bolt that holds it to the car,then obviously the 2 bolts on the top.There also held in by some sort of pins on the outside of the light as well but their attatched to the light so no undoing for those.

If it's the first time they've been taken out they will be very stiff,it's just about pulling and twisting,it's not very nice as it sounds like your gonna break them but they'll pop out

The spade connectors are black to red if i remember correctly,although i might be wrong lol

 

nice self?one bern n yea they are red n black where do they go somewher inside the light it?

 

Yeah i just some electric tape around them and put them inside the casing that pushes and twists onto the headlight

 

iv done all that today n avin no joy nowts hapning at all any ideas?

 

Have you tried swapping the spade connectors? The first time i fitted mine nothing worked as i'd put the wrong connectors together

 

Had a quick look at the e-bay ad, but no joy, I was looking for a pic of the wiring harness.

Can you take a pic of one laid out?

If not, post a full description of what you have, any relays, fuses what connectors, colour of cable and where it goes from and to.