Are the standard 4pot fronts and 2pot rear calipers easy to rebuild? I fancy having a go myself.

Is there any how to or manual any were?

 

Similar to this

http://forums.nasioc.com/forums/show...&highlight=DIY

but you'll need this

http://www.importcarparts.co.uk/part...44&var=26&dc=y

or be lazy, do this and save stress

http://www.godspeedbrakes.co.uk/Reco...pers/recon.htm

I did.

 

Hi
They are fairly straight forward to do , the main thing is to make sure everything is clean and rust free , the bores of the calipers are usually rusty on the top lip , clean them with fine emery cloth to clean the rust from the bores ,

I can supply you stainless steel pistons with a lifetime guarantee and seals to do them yourself , and can also run through it fully over the phone so you can do it properly.

Or as Ian above says , I can also supply you fully reconditioned calipers on an exchange basis
Cheers Ian

 

Ian you have PM.

 

Thanks guys, At the moment i only have the 2pot rears and i am looking for 4pot fronts, however i will be re-building them once i get them.

I take it the rear 2 pots are pretty much the same to re-build?