If i fit a nitrous kit to my fiesta 1.1 (race lightened) will i get the neck snapping performance that they do on The Fast and the Furious?

FWW

 

No

 

 

Just as a point of principle, if a 1.1 Fiesta had suitable mods to pistons etc then there is no reason why it can't develop over 200 bhp on NOS. Neck snapping....yes, gearbox, clutch, driveshaft (edited to add crank ) also I would expect

Take me to the Muppets please



[Edited by Cosie Convert - 3/30/2002 7:55:31 PM]

 

Not sure about the 200bhp Andy, the valencia engine has only 3 main bearings rather than the 5 in the Kent. I wouldn't want to extract that kinda grunt from it.

---john---

 

Don't see why not

Those little mini's only had 3 bearing cranks and they revved them to 9500+ fitted 16 valve heads and turbo's to give over 200 bhp.

IIRC the Cosworth FVA was based on the 100E pre x-flow 3 bearing block/crank ? (showing my age now)

ps I can't believe we are seriously discussing this

 

FWW started all this

 

Try Severn Valley Motorsport. They got 400bhp from a Ford Ka !!!

 

would i be able to get 400bhp from my fiesta, as it is ford, the same as the ka.

fww

 

Chris Todd from PE has got 330BHP from his Fiesta. But then he has Nitrous, a turbo (high revs) and a supercharger (low revs). Nice torque curve though.

Seeing a Fiesta do 13.0 standing quarter at Santa Pod is quite a sight !

Steve

 

No matter how well dressed the bag of ****, it's still a bag of ****.

 

I do like the submersible (sp?) garden fountain pump that runs the chargecooler, and the central locking motor that runs the supercharger bypass valve.

He drew the line when I suggested coat hanger operated VVT though. Some people.

Steve

 

Snowcrash fitted Noz to his Justy - it developed over 450bhp!

 

What engine ?