Just about to have a go at changing the bearings on the above item so as to have a spare does anyone either have the covers off the timing belt or a spare pulley that could tell me the depth from the front of the pulley to the bearing, I didn't measure it before I pressed them out.

Thanks

 

They should have markings on take them to a bearing supplier and they can sort em for you hth

 

If its the water pump pulley for the timing belt :- 5.50 ~ 5.60 mm from pulley face to outer race of the bearing.
You should see the witness marks from the original bearing on the ID of the pump pulley if your unsure.


Mick

 

Thanks Guys now sorted thanks to you