here we have my tubular headers done around 13000miles in mint con (apart from 1 fixing stub broken visable in picture) there slip jointed and not the cheap sort that leak and blow unsure ov make or brand tho very well made with no sign ov cracking like the cheaper items £SOLD
pm call or tx cheers
07785942237matt





broken off stud visable this is mounting point too block not turbo

 

These look like Syms equal length headers........

 

Defo unequal length, not sure on the make though

Equal length



Banny

 

there slightly uneven lengh they take a fair bit ov the burble out than std headers but can still be herd at idle then sound like a super bike at speed

 

http://bbs.22b.com/cgi-bin/ultimateb...=001639#000000

Heres a link to a thread on 22b.com.........Syms 4-2-1 headers.

Just waiting to get mine fitted and mapped.....

 

taken from syms racing website....

EXHAUST HEADER WRX/22B
SYMS's has arrived at a total tuned exhaust system. When the cylinder is in the exhaust position, the other cylinder's inhale or exhaust valve gathers at the exhaust manifold opened, the exhaust gas energy wouldn't turn the turbine and would escape to the cylinder. (= blow down) It needs the "4 in to 2 layout" to prevent this from occurring. SYMS exhaust manifold has been completely designed for the exhaust system through pushing the turbine by its joined front side CYL 1 and CYL 2 and the backside of CYL 3 and CYL 4. These are then forced into an independent stage, until just short of the activation of the turbine. Therefore dramatically increases the engine ability to spool up faster at lower RPM. When compared with other exhaust manifolds, SYMS uses narrower pipe compared to other exhaust manufactures especially the primary. The reason for the narrower pipe is to speed up the flow of exhaust gases. (It is common knowledge that smaller diameter pipe do two things. 1-Exhaust gases speed up. 2-Helps maintain high exhaust gas temp to improve flow.) Also, the flange is part of the air-funnel, forming a smooth connection with the engine's exhaust port. SUBARU's engine is all made of aluminum. Therefore, the port-flange-span changes 2-3mm between cold and hot. It needs the sleeve-flange for absorbing the changes in the span do to the expansion of heat. A slip-joint of double structures has been implemented that consist of an airtight-slide-sleeve for the savings in endurance and high-pressure exhaust gas.

 

cheers for that rooferman there the 1s bud can i ask how much you give for your and am i asking the right price???pm please cheers

 

Hi there,
Where abouts are you located?
Cheers

 

hi bud im basaed in walsall 10mins form birmingham or 2mins off juntion 10 ov the m6 motorway bud

 

you have pm

 

right back at you bud

 

havent recieved anything

 

sold 2 me

 

sorry kiran i thought id sent you a pm but headers are now sold too beale sorry bud