APS 3" turbo back complete ehaust system for wrx sti 2001 to 2007
As above covered approx 5000 miles in very good condition, aps system is one of the best available complete decat with no restrictions in place, fit is very nice, and the rumble and loudness is fine as it's not as loud as the blitz or hks systems, but louder than the prodrive,
cost new over £750
new price £430 bargin
needs a bit of clean as a bit dusty but still shiny..
APS 3 inch Single Tip Turboback Exhaust Subaru WRX/STI
http://us.st12.yimg.com/us.st.yimg.c...2012_198590410







Optimum gas flow and minimal exhaust back pressure is essential for high power. The APS high output stainless steel exhaust system really performs. Careful attention to tube diameter, smooth radius mandrel bends and muffler design is essential for high performance. With 20 years of experience in exhaust system design, we have built a superb exhaust system.
The optimum internal profiles cannot be achieved with twin pipe or bell mouth pipes. APS has engineered the High Flow Turbo Outlet housing for extreme gas flow and high exhaust gas temperatures which are normal in high performance turbocharged engines. Cast in high temperature ductile iron ensures optimum internal shape and maximum durability under high rpm, load and boost conditions.
cost new over £750
cost new over £750
new price £430 bargin
needs a bit of clean as a bit dusty but still shiny..
APS 3 inch Single Tip Turboback Exhaust Subaru WRX/STI
http://us.st12.yimg.com/us.st.yimg.c...2012_198590410







Optimum gas flow and minimal exhaust back pressure is essential for high power. The APS high output stainless steel exhaust system really performs. Careful attention to tube diameter, smooth radius mandrel bends and muffler design is essential for high performance. With 20 years of experience in exhaust system design, we have built a superb exhaust system.
The optimum internal profiles cannot be achieved with twin pipe or bell mouth pipes. APS has engineered the High Flow Turbo Outlet housing for extreme gas flow and high exhaust gas temperatures which are normal in high performance turbocharged engines. Cast in high temperature ductile iron ensures optimum internal shape and maximum durability under high rpm, load and boost conditions.
cost new over £750
Last edited by supa; Dec 6, 2008 at 03:31 PM.
I have one of these, awesome bit of kit that's just about the best on the market IMHO. I hit 355bhp on a 2.0 WRX with this as part of the mods, and it's essential to get over that on a 2 or 2.5. Good luck with the sale.
Trending Topics
it's in top nick as done very little miles has some small scratches needs a clean as its a bit dusty but could get some more pics over weekend..
see pics but have not damaged the exhaust in any way.
see pics but have not damaged the exhaust in any way.
Last edited by supa; Dec 6, 2008 at 03:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
34
Nov 7, 2024 04:10 PM
user 46373939
ScoobyNet General
6
Sep 17, 2015 03:51 PM



