Post your results....
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
as the official results may be a while, could people post their best two 1/4mile results from yesterday inc power output and brief description of mods?
Cheers,
Bob
Cheers,
Bob
Last edited by Aztec Performance Ltd; May 28, 2007 at 06:48 PM.
all the results are now in and have (just) been emailed to webmaster, need a little work to make a presentable format first, trophy winners list now posted.
slowest run of the day was 14.16s (ie someones best run) which is quite impressive when you think about it. :-)
2 x 9s cars also prior to the rain, would have made a great final assuming they both got thro on shootouts.
slowest run of the day was 14.16s (ie someones best run) which is quite impressive when you think about it. :-)
2 x 9s cars also prior to the rain, would have made a great final assuming they both got thro on shootouts.
I beat my previous personal best on the 1/4 (13.01@108mph, couldn't get traction at the pod)
12.50@109mph (60ft 1.910)
12.51@106mph (60ft 1.940)
My best handling lap in the damp was 39.41 secs
and my best in the wet just before the final was 42.63 secs
So pretty pleased overall
Mods:
Apexi ECU
Induction kit
FMIC
H+S exhaust
Power c.300bhp/280lbft
AST suspension
Stoptech 328x28mm front brake kit
12.50@109mph (60ft 1.910)
12.51@106mph (60ft 1.940)
My best handling lap in the damp was 39.41 secs
and my best in the wet just before the final was 42.63 secs
So pretty pleased overall

Mods:
Apexi ECU
Induction kit
FMIC
H+S exhaust
Power c.300bhp/280lbft
AST suspension
Stoptech 328x28mm front brake kit
Last edited by Dill_typeR; May 29, 2007 at 12:25 AM. Reason: i didnt RTFQ!
Trending Topics
Joined: Apr 2005
Posts: 11,778
Likes: 4
From: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
12.93s @ 107mph - 60ft -1.810
12.78s @ 108mph - 60ft -1.830
Handling - dont bother asking
Mods in HERE
12.78s @ 108mph - 60ft -1.830
Handling - dont bother asking

Mods in HERE
Last edited by mickywrx; May 28, 2007 at 06:47 PM.
12.16 @115
12.16 @113
12.22 @117
60' were mostly 1.8 with 1 @ 1.71
car was finished being built, mot'd and taxed saturday and mapped on the way up.
std. 2.2T block with sti 5 running gear
12.16 @113
12.22 @117
60' were mostly 1.8 with 1 @ 1.71
car was finished being built, mot'd and taxed saturday and mapped on the way up.
std. 2.2T block with sti 5 running gear
12.62 @ 107 bit gutted as did 12.24 @112 at santa pod and i had the boost controller set up and was hoping to get in the 11's well never mind done me clutch couldnt do the handling circuit and had a 200 mile journey home with trouble selecting gear in the pouring rain but hey i bloody enjoyed watching all you guys giving it large up the track and had a great time
MY06 Spec D (with all standard features ie leather interior, extra sound proofing still in place). Mods See 'My Scoob' but in brief Milltek Exhaust, Remap (336bhp & 355 lb/ft) and AST suspension.
I was not driving my car as there is no way could I have set these times so full credit to 'my driver' 16 year old Tom Dunstan.
1/4 mile - 13.01 - 60ft - 1.880
Handling Circuit
Best Lap 40.19
He did only one wet lap in a time of 42.14
Robin
I was not driving my car as there is no way could I have set these times so full credit to 'my driver' 16 year old Tom Dunstan.
1/4 mile - 13.01 - 60ft - 1.880
Handling Circuit
Best Lap 40.19
He did only one wet lap in a time of 42.14
Robin
Best Drag : - 13.37 - 101Mph (3rd in Class)
Best Handling: - 41.45
Standard MY94 WRX (263 bhp) , Straight through pipe, Dawes & bigger injectors with a Z4 ECU, however this is all useless as i cannot afford to have it mapped lol.
PS. I've got a fuel pump to be fitted now too.
Best Handling: - 41.45
Standard MY94 WRX (263 bhp) , Straight through pipe, Dawes & bigger injectors with a Z4 ECU, however this is all useless as i cannot afford to have it mapped lol.
PS. I've got a fuel pump to be fitted now too.
Best Drag : - 13.37 - 101Mph (3rd in Class)
Best Handling: - 41.45
Standard MY94 WRX (263 bhp) , Straight through pipe, Dawes & bigger injectors with a Z4 ECU, however this is all useless as i cannot afford to have it mapped lol.
PS. I've got a fuel pump to be fitted now too.
Best Handling: - 41.45
Standard MY94 WRX (263 bhp) , Straight through pipe, Dawes & bigger injectors with a Z4 ECU, however this is all useless as i cannot afford to have it mapped lol.
PS. I've got a fuel pump to be fitted now too.

well dun
12.32 @ 114 should have stopped there. But i did one more run before the rain came on....
12.23 @ 114 with 1.800 60ft.
STi 5, rebuilt standard bottom end, gas flowed heads, td05 20g turbo, front mounted intercooler, management, pump, regulator, boost control, full exhaust, 370bhp 320lb/ft (97ron) running on kumho ecsta road tyres
Don't like queues, so i didn't do the handling circuit til it was very wet, which was fun. pointless, but fun
12.23 @ 114 with 1.800 60ft.
STi 5, rebuilt standard bottom end, gas flowed heads, td05 20g turbo, front mounted intercooler, management, pump, regulator, boost control, full exhaust, 370bhp 320lb/ft (97ron) running on kumho ecsta road tyres
Don't like queues, so i didn't do the handling circuit til it was very wet, which was fun. pointless, but fun
Drag
12.5 @ 111mph - 60ft 1.9
12.52 @ 110mph - 60ft 1.89
Handling
44.21
44.26
Mods, aet turbo, hyperflow monster fmic, manifolds, exhaust, custom OMA map. no idea on power output, but im over the moon as it beats my personal best of 13.92 from last year
12.5 @ 111mph - 60ft 1.9
12.52 @ 110mph - 60ft 1.89
Handling
44.21
44.26
Mods, aet turbo, hyperflow monster fmic, manifolds, exhaust, custom OMA map. no idea on power output, but im over the moon as it beats my personal best of 13.92 from last year




