Hello fella's!


Jonh (Felstead) has sent me the wiring diagram of the version 5/6 STI DCCD-controller. All the wire-colours seemed to match perfectely, until we checked it out completely today
We came across a little problem that you might be able to solve, or maybe know someone who can.

http://members.iinet.net.au/~tuna/DC...%20Diagram.jpg

http://www.btinternet.com/~john.fels...ringcolour.jpg

All wires are as seen on the diagram, except one. (Or two actually.)

On the "8x2" plug all wires have the colours like the wiring diagram.

On the "10x2" plug however I found all colours, except the one on position 3 on the plug (See wiring diagram)
This one should be "YB" which I understood stands for yellow with blue line. This one is not there however.
Position (From top to bottom 10x2-plug) 9, 10, 20, 8, 1, 2, 4, 12, 14, 11 all match with the colours, except position 3.

Besides this wires I have still 2 wires left (So one móre than the eleven on the 10x2 plug on the diagram)
These are a Red one with a blue line, and a yellow one with a green line.

So one colour-combination is not there, and there is an extra wire.

Anybody got the solution?
Wrong colourcode perhaps?

We have two car's here which must e hooked up with a DCCD-controller on a 5MT, so you would make two persons very happy!


Cheers, and thanks for all kind of help!

Arend Terpstra.
Holland.