Hi,

I'm sure there are plenty of you out there who have done this, just wanting to know the O2 signal wire to connect to at the ECU.

Can anybody help?

Scott

 

If knowbody knows, can anybody tell me were I can find out?

I tried my local dealer the last time I fitted one to my classic and they were no help at all.

 

Try ringing Subaru tech support, their number is on subaru's main site.

 

Scott,
The one fitted to my 02 wrx is connected to my ecu at the lambda 02 wire I dont know if the wiring is the same for the sti but here goes. at the ecu it is block 135/pin17 blue with silver flash,block 135 is the 4th one down looking at your ecu from the top.

 

Cheer Gussy,

I'll give that one a try and see if it works

Scott

 

Ecu pinouts are here .. MY01/02 pinouts same for STi

http://dspace.dial.pipex.com/bob_raw...connection.htm

bob

 

Hi Bob

I'm just wondering if a Lambda link is required after Mapping (You very kindly mapped my bugeye and I'm back again when time allows after some mods) as I'm not sure what warnings it would give and wether you would recommend me fitting one for my next session.

Thanks

Shaun (aka... Midlife.....)