Where can I get an oil pressure sender to replace the OE part to work with a pressure gauge ?

Can anyone help.

Clive

 

Depends which gauge, I got one from Le Mans motorsport

 

Most gauges come with the sender, don't they?


If not, try whoever sold it you, first.

Alcazar

 

I did get one but it did not fit under altenator and whilst trying to fit it I sort of damaged the sender. Ooops

 

As mentioned, LeMans do a suitable tee-piece so you can have the OE pressure switch working as well.
From experience! - make sure it screws in at least 3 turns and use ptfe tape!
JohnD

 

Sounds like you need the extension pipe and fittings as well as a new sender, What make are the gauges??

For the pipe extension have a look on chiarks site, ( http://www.chiark.co.uk/scooby/gauges_pressure.asp ) it gives the part numbers to ask for or phone Le Mans Motorsport and they will sort you out, that’s what I did and it works a treat.

 

[QUOTE=tmo]Sounds like you need the extension pipe and fittings as well as a new sender, What make are the gauges??[QUOTE=tmo]

Just a cheap job I picked up off ebay.

Did not think sender would have to match gauge though. Thanks for the advise on an extension.

Clive

 

Think it depends on the sender unit range i.e. 0 - 100 or some are 0 - 150 etc.

As prev said "use lots of PTFE" and be careful when screwing the adaptor in too much and snap, not enough and leak city