Hi Guys,

Was wondering if any1 has got a guide for fitting a VTA dump valve on a MY97 impreza, preferably with pictures if possible.

cheers

Mo

 

Just take off the old dump valve.
Fit new one into pipe on right that comes from under intercooler.
Fit a bung in the pipe on left that is short from the air induction pipework (you will need a jubilee clip to secure it in place).
Fit the small bore pipe from inlet manifold to the new dump valve (the same pipe that was connected to the standard dump valve).

Took me all of 15 mins to fit mine.
Hope this helps you.

 

cheers rally,

will giv it a go over the weekend!

Mo