MY03 JDM sti boost gauge pipe ??
Thread Starter
Scooby Regular
Joined: Jun 2002
Posts: 740
Likes: 0
MY03 JDM sti boost gauge pipe ??
Just a quick one fitted a set of defi bf gauges at the weekend
I put the pipe from the turbo boost sender unit between the elbow on the turbo and the boost solenoid (I think) via the supplied T piece
Is this right?
It doesn’t give me any negative pressure and seems to spike quite a bit
Where should I have put it?
Tal
I put the pipe from the turbo boost sender unit between the elbow on the turbo and the boost solenoid (I think) via the supplied T piece
Is this right?
It doesn’t give me any negative pressure and seems to spike quite a bit
Where should I have put it?
Tal
Scooby Regular
iTrader: (3)
Joined: May 2003
Posts: 1,081
Likes: 0
From: from a zakspeed fiesta to a PPP'd sti8 in lincs
hi tal
i did the same m8 and got no negative neither so i ended up T'ing it in on the small pipe that comes out the front of the inlet manifold just behind where the alternator is (i think without looking again
)
Andy
i did the same m8 and got no negative neither so i ended up T'ing it in on the small pipe that comes out the front of the inlet manifold just behind where the alternator is (i think without looking again
)Andy
Scooby Regular
Joined: Dec 2001
Posts: 1,780
Likes: 0
You dont fit it near the boost solenoid,do you know where your dump valve is ? Its on the right face of your intercooler.Cut the pipe that comes off the right hand side of the dump valve (small gauge tube) and insert a T piece and away you go.
Zippy
Zippy
Last edited by ZIPPY; Mar 15, 2004 at 05:46 PM.
Originally Posted by ZIPPY
You dont fit it near the boost solenoid,do you know where your dump valve is ? Its on the right face of your intercooler.Cut the pipe that comes off the right hand side of the dump valve (small gauge tube) and insert a T piece and away you go.
Zippy
Zippy
Mark
Thread
Thread Starter
Forum
Replies
Last Post
