Defi Control Unit 2 Settings
Chaps,
When I turn on the ignition with my newly installed Defi's (with the Mk2 controller), because the engine isn't running, a continuous warning beep sounds due to the lack of Oil Pressure.
Is there any way round this?
Ta,
Matt
When I turn on the ignition with my newly installed Defi's (with the Mk2 controller), because the engine isn't running, a continuous warning beep sounds due to the lack of Oil Pressure.
Is there any way round this?
Ta,
Matt
It only does it untill you start up though, so not a great problem really. Glad to see you have your gauges fitted Rich, are you pleased with them? i'm well chuffed with mine, well worth the extra cash.
James.
James.
Hi Matt. youv'e taken your live from the assessory live and not an ignition live I did the same myself. meant could not have radio on without engine running. I found an ign live below steering wheel by the fuses. got no photos unfortunately.
ken
ken
Trending Topics
You can temporarily silence the bleep by recording 3 mins of data whilst the engine is running, and then playing this back. However it still bleeps again after 3 mins and you have to press playback again!
Cheers,
Ian
Cheers,
Ian
Thanks for the help guys but I guess I didn't ask the question very well. I know why it is doing it, what I wanted to find out was if I could stop it.
I know that if I want to listen to the stereo with the engine/ignition off, I need to wire the Stereo's switched live to Permanent but that is not a requirement. I just wanted the Oil P warning beep not to sound when the engine is off (but the ignition is on) which it seems you can't do.
I don't need the stereo when the engine is off so I wired it the standard way the ISO connector is wired up.
Thanks anyway,
Matt
I know that if I want to listen to the stereo with the engine/ignition off, I need to wire the Stereo's switched live to Permanent but that is not a requirement. I just wanted the Oil P warning beep not to sound when the engine is off (but the ignition is on) which it seems you can't do.
I don't need the stereo when the engine is off so I wired it the standard way the ISO connector is wired up.
Thanks anyway,
Matt
Matt, the only way you can stop it is to wire the defi control box orange wire to a live when the engine is running and not the aux or ign live. I don't think it is possible to disable the alarm setting on the defi.
ken
ken
Thread
Thread Starter
Forum
Replies
Last Post




