How to do a coolant change...?
is this the same on the impreza as a normal car? (my mr2 had to be done in a certain way!)
i.e. wait till cold, remove radiator cap, drain from bottom of radiator...refill or flush then refill.
someone please email me or post here how to do it in detail....i.e. location of drainage plugs etc.
thanx in advance
i.e. wait till cold, remove radiator cap, drain from bottom of radiator...refill or flush then refill.
someone please email me or post here how to do it in detail....i.e. location of drainage plugs etc.
thanx in advance
Former Sponsor
iTrader: (4)
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
There is one drain plug bottom left (drivers side UK) back of rad..
Just fill it very slowly through header tank
No different to normal car really.. heater on hot first to ensure water drains out of heater matrix and refills..
JGM
Just fill it very slowly through header tank
No different to normal car really.. heater on hot first to ensure water drains out of heater matrix and refills..
JGM
Thread
Thread Starter
Forum
Replies
Last Post
Bazil_SW
Engine Management and ECU Remapping
24
Sep 21, 2015 11:55 PM



