How many meters of thermal wrap is needed to wrap the downpipe, uppipe and a gruppe-s manifold, with each pipe wrapped. I think 1"x50 for the manifold en 2"x50 for the downpipe and uppipe?? Please advise.

 

I used 25m to wrap downpipe.
ken

 

I used 2 x 50ft of 2" for headers, uppipe, and downpipe.

 

I used 30m to do my Gruppe-S manifold, Up-pipe, and most of the downpipe (last 60cm or so of D/P left cos I ran out!). You will have real trouble wrapping the pipes seperately near the collector as the gap is Very tight!

 

Thanx for the replies, so ideally I wil need 2x 1"x50ft for the headers and uppipe, and 1x 2"x50ft for the downpipe.

 

And about 250 ft for the f**k ups :-D= :-D=


greets

 

My down pipe is cuddled by 10metres of 50mm stuff.. cooltek..

JGM