..from MY93 WRX currently running at 253 (full decat and panel filter)?

 

Motec, Link, Pectel expect 40 bhp gains with a full system

 

Whats the pricing on those? I've heard David_Wallis does a good remap?

 

He does indeed & its well worth negotiating as some stunning deal can be had at the moment......

 

Get a map from David, his are about £100 and are v.good. Motec and link are complete ecu's but the price tag is £1500-£2000.
I am currently running one of Davids maps and am very pleased with it.

 

Will email David if I can find a post or 500 of his!

 

Scooby96,

U mailed David...he mailed me...I've mailed u both....

 

SCOTT, ARE YOU able to offer a remap for a my94 wrx-sti-1 and if so whats an approx price, mark

 

YES,

Mail me offline with your ECU details and we can talk prices and ECU types. Plenty of others on here have had my remaps, which origionally used the ScoobyECU board. hopefully someone will post here with 'good' feedback.

I am able to get hold of genuine 27C1028 chips, so no longer need the ScoobyECU adaptor (which are getting hard to get from the supplier now anyway).

See my install instructions referenced from David's site www.scoobyecu.co.uk which also gives details why the ScoobyECU was developed.

 

scott yhm, mark

 

Scott, yep thanks - had your email and definitely going for the remap you told me about. Would also like to hear feedback from anyone who's had theres done already.

 

Scott, isn't David doing them then I was hoping to pop over to his to get my 93wrx re-mapped at the end of the month. Is there a price difference in getting a genuine IC from you rather than using the pcb? Do you have the same maps as David? I was after the 14psi one for my car, not bothered about big power just better map for uk fuel etc

 

charlie dave mailed me, cant do any ecu upgrade ect for early impreza

 

I can still do them, I just need to order some more boards, I have some spares, but I would prefer to keep these at the moment, I had a problem with some I sent out and Im not doing any more until the others are sorted (simple programming error hopefully.. nothing serious) at the most a logic IC failure.

David

 

ok so who mailed me this morning, lol he was called dave ?? confused dave can you offer my94 sti-1 ecu remap or up grade or what ever it is you can do ,mark

 

David,

Check the Opto-Isolators as Farnell sent me some d-type flip flops once (similar part number...totally different function)

 

Ermm.. I mailed you this morning, unless David did too....

 

forward me the mail david@wallis2000.co.uk

David

 

lol np some one has, lol scott was it you saying you couldnt do the early ecu,s mark

 

nope..wasn't me
The early ECU's are all I've ever done.

 

David,

I spoke to you about ordering a ScoobyECU last week. I don't want to hassel you, as I know you're busy. Just wanted to know how long it will be before you get any more in stock.


Cheers

 

David - I didn't want to bug you as I know you have a LOT on your plate at the moment If it's easier (from your point of view) for me to get one from Scott then I can but I asked you first and owe you for that fuel pump rescue so you have first dibs
Just let me know

 

charlie if you want it fitting then its easy to get it from me

David

 

I've got the 28pin socket already David, just need the board/IC. I've spent years soldering so should be fine doing it myself (famous last words) Just didn't want to keep e-mailing you as I know you are busy at the moment If you have the board/time I could pop over one night (after the 26th would be good though as that's payday)

 

Charlie,

Make sure you have a damn good solder sucker, a fine tipped iron and thin solder. As the tracking on the ECU PCB is very fine/brittle.

 

Thanks Scott, I'll use the iron at work, it's a very good one with a very fine tip. I have an old ecu at home that doesn't work, I'll try it out on that first

 

David is still doing them...
I stopped doing them in february when I traded up to an MY00. Plus the PCB supplier did not respond to my mails for more bare boards. (David has had the same problem, but I think his last batch was larger than mine).

Since then I have managed to get a limited number of genuine 27C1028 chips, so can remap without using the ScoobyECU PCB.

Prices are the same, as the genuine blank chips cost just as much as the ScoobyECU hardware.

P.S for a 93WRX can do a 14psi or 15.5psi map.

[Edited by Scott.T - 8/12/2003 11:54:13 AM]

 

oops double post

[Edited by Charlie H - 8/12/2003 11:35:53 PM]