Hi, I´m new to this forum and need help with wiring diagram for -01 impreza with sohc engine. More specific I need to find the speed and rpm signal into the ECU.
I have found several difrent wiring diagrams both here and on other places on the internet but none of them seem to be the right one, the couloring of the cables doesn´t seem to be the same as on my car. So should I look for the cable with the right coulor or go for the pin number in the connector?
The car is now in sweden but was originaly sold in belgium in march -01. I have also tried with -00 wiringdiagram but that is even more wrong.

/Gustaf

 

Try these for size - see attached.
Assumes the car is a "Newage" G11 model and a European Domestic model.

 

Thanks, I will try later today.

 

thanks for help, seems like coloring on cabels isn´t matching my car but pin-number is correct.

 

Out of interest what is the "applied model" code as shown on the VIN plate??
and just to confirm

 

It´s the pin 30 on B134 going in to ecu that doesn´t match. I have a blue/green cable but as I read the diagram it should have been green only.

 

If you follow the wiring back towards the combimeter, at the bulkhead loom to instrument panel loom connector (B37/i2) it changes to BLue/Green.
Maybe an error in the workshop manual??? In the US version of the MY01 manual it is shown as green all the way.